As I recently announced: I have a massive project ahead of me. In a span of only seven months, I’m going to attempt to build a World War II Jeep from scratch using parts I’m buying from eBay. Yes, you read that right: from scratch. While I’ll get into the particulars of the build in my upcoming “build plan” article, today I want to show you where this project is actually going to take place: in my driveway.
Take a look at the footage under the reel below and you’ll see the Willys Overland factory in Toledo, Ohio, where an American icon is being built by hardworking men and women working as a team, using overhead hoists, spray booths, a moving assembly line, and all sorts of other specialized equipment to get allied soldiers the rough-and-tumble runabout they needed to fight for freedom.
At its peak, the Willys Overland factory was cranking out General Purpose (GP, from which the name “Jeep” is derived) vehicles at a rate of one every 5-ish minutes. By 1945, Willys Overland had produced over 350,000 “MBs,” while Ford — the other company contracted to build the Jeep, whose basic architecture had actually been developed by the small Butler, Pennsylvania-based company Bantam (which in the early 1940s was building British Austin 7s under license) — built 280,000 “GPWs.”
View this post on Instagram
That’s right: Between 1941 and 1945, two companies cranked out roughly 650,000 MBs and GPWs, which were the designations for World War II Jeeps built by Willys-Overland and Ford, respectively, though they were largely identical. That’s around a Jeep every three minutes between the two companies. That haste builds upon American Bantam’s shockingly quick development period of just 49 days to design and build the first prototype.
So if a tiny Butler, PA-based company can develop an icon in only 49 days, and Willys and Ford could crank out a Jeep every 3 minutes, then surely I can build one in seven months, right?
I’m not so sure. You see, not only do I not have the personnel or specialized equipment, I also don’t have a factory. I have this driveway:
It’s skinny for the first 60 or so feet, then it widens a bit:
I’m grateful to have a driveway here in LA; it’s awesome, but it’s not a car factory by any stretch. It’s a fairly tight driveway that gets blisteringly hot pretty much year-round, and as far as equipment… I have a cherry picker and some hand tools.
I’m in the process of erecting a few sheds on my property, and I do have a giant one already in my driveway. I need to find a way to organize the hundreds of parts that will be rolling in from all over the world via eBay Motors (you can see the frame in the photo, as well as the body). With so many items coming in from various vendors, I could see this getting out of hand if I don’t have a solid system in place.
Though I do need space for the assembly, I may keep that giant shed that’s in my driveway solely for this project; it’s about 10 feet by 12 feet, and should fit everything I need. It’s currently filled with all sorts of junk:
I’ll buy some shelves, break out my labeling device, and break all the parts down into subsystems according to the official Chrysler designation, BICEEPR, which means:
- Body
- Interior
- Chassis
- Electrical
- Engine systems
- Powertrain
I’ll ignore the “R” for restraints, because the WWII Jeep didn’t have any.
I need to install some kind of sun shade above, so this is bearable, and I’ll need some lighting. This isn’t going to be like a typical car-media build — it’s not going to be in a fancy shop with a hydraulic lift and a bunch of expert technicians — it will be a dad and his friends in a driveway. Maybe I’ll tow the Jeep to a friend’s shop every now and then, but for the most part, it’s happening just outside my kitchen, in the blistering heat, between me changing my baby’s diaper and trying to edit blogs.
It’s a daunting one, and I welcome any input you, dear readers, may have on how I can best organize this driveway to handle the Jeep onslaught that lies ahead.
I would legit love to lend a hand next time I’m in LA. This whole concept has been on my mind for a jeep, a beetle, or a mini since I saw the jeep tubs and chassis available in a JC Whitney catalog when I was a kid
There goes the neighborhood. Best of luck with the build, but my money is on this one having to be completed at a different undisclosed location.
First things first get yourself a cheap 200.00 Walmart carport with roll up sides.that way you will have shade and protection from the rain second go online and find a used but good air compressor and impact wrench and ratchet get a good set of 4 jack stands
Mail order Jeep. That’s not a Willys. That’s a Wile E. Coyote.
Last time I was in Pittsburgh I got to see American Bantam’s winning prototype in the Heinz museum. The placard text was only a little salty that Willys and Ford got the contracts to actually build it.
depending on what the goal is for content/sponsors, seems like a better way would be to fly out SWG, Mercedes, and Torch for a week to thrash on it. Maybe get Fred Williamson to help for a couple days. shoot it in wide to livestream while having a couple of camera crews shoot close of all the assembly to edit together for posts and videos. better content for the sponsors
Fred, DF, and Pewe. These are the guys
This seems pretty simple premise, but time management is going to bite you in the ass. Babies are no joke, they are epic time sinks. I wish you luck!
I like that this checks every box on the ‘bad ideas’ project list
Here’s my major concern for you regarding trying to build this in your driveway:
Theft.
When I lived in West LA – people would jump on NextDoor to complain about their Mercedes and Lexus’ parked in the street and driveways – and having wheels, bumpers, mirrors, lighting stolen off the cars.
They were using their garages as ADUs/Storage facilities too.
I’d be clearing out that garage right now.
I’ve built a whole-ass plane in two weeks with some factory help and know many guys who have built planes alone in months to single digit years.
Something with the complexity of an overgrown go-cart is no problem in seven months, even with kid(s) and running a business.
Just touch it every day so you keep making progress.
“I’ve built a whole-ass plane in two weeks with some factory help and know many guys who have built planes alone in months to single digit years”
Oh yeah? I’ve built a whole ass plane in less than a minute! Sure it was built of balsa wood and it’s prop was powered by a rubber band but damnit that thing FLEW!