Home » Autopian Labs Has Developed The World’s Most Advanced Stain-Tolerant Shirt And You Can Order One

Autopian Labs Has Developed The World’s Most Advanced Stain-Tolerant Shirt And You Can Order One

Stain O Flage Top

You may not be aware of this, but this delightful website that you (hopefully) read non-stop day in and day out is actually just one part of the Greater Autopian Empire. The site is our public-facing media arm, but the truth is that at the heart of this organization is Autopian Labs, the secretive R&D facility that is constantly pursuing scientific developments to make human life better, richer, and with a pervasive scent of salami.

Autopian Labs has already announced a few groundbreaking discoveries, like the development of methods to store data in cured meats, advancements in obsolete cybernetics interfacing with obsolete optics, and even some legacy, long-term research projects involving petrochemical-based dyestuffs.

Vidframe Min Top
Vidframe Min Bottom

In fact, it’s that last area of research – where our own David Tracy attempted to dye clothing in motor oil in an attempt to mitigate stains – that brings us to our latest scientific advancement, one that is finally ready to share with the general public: we believe we have finally developed an effective, durable, and relatively safe stain-mitigating shirt. My friends, I would like to present to you the Autopian Labs Stain-O-Flage Mark 1 shirt:

Stain 1

We’re quite proud of our achievement, but in the interests of science, I have to make clear that this is still somewhat in the prototype stage. We knew there was a demand for a truly stain-forgiving shirt, and had several simultaneous research projects working on the problem.

A garment that actively repelled stains via an electromagnetic stain-repulsor field held initial promise, but the considerable power demands necessitated a 56-pound backpack with an always-running two-stroke generator engine, and the powerful EM anti-stain field caused burns and severe vomiting in our test subjects, who, I would like to stress, were all volunteers from the penal system and despite what you may hear in salacious news reports in the coming weeks, were fully informed of the nature of the study.

While we’re at it, I may as well address the animal testing question. Did we test these garments on animals? Well, yes. But I think the media is sensationalizing what actually happened. Did we get 75 puppies from the pound, put them in small versions of our Stain-O-Flage shirts, and then set them loose in an empty warehouse where the floor was littered with over 200 foot-long hoagies, all heavily condimented in mustard, mayo, and other stain-prone sauces? Yes, maybe we did.

Did some of the puppies eat too many hoagies and get a little sick? Maybe. Did some of them puke semi-masticated cold cuts all over our researchers’ laps? Perhaps. Did the vast majority of the puppies have the best fucking day of their lives? I think so. Did we learn much from this experiment? I’m not at liberty to say.

We also attempted to develop chemically repellent shirts that would simply not bond with oil, mustard, grease, mud, and so on, and while this was also promising, the skin burns we encountered seemed to be more severe than what most people are willing to accept from a T-shirt, which, according to our research, is “none” when it comes to skin burns.

This feels like a cultural failing, but that’s the market we have to deal with. If everyone is too candy-assed to not want a bit of chemical burns from their clothing, then I guess, fine, we’ll just have to accept that.

So what did we do? Well, we took a lesson from the most successful stain-forgiving materials on the planet: casino, movie theater, and bowling alley carpets, along with a bit of inspiration from WWI “dazzle ship” camouflage.

Casinocarpet Etc
Source images: AliExpress, Wikimedia Commons, Smithsonian

There are about a century’s worth of research data involving theater/casino/bowling alley carpeting and its remarkable ability to “absorb” stains from a wide variety of stainable materials. The complex, Dan Flashican patterns have been carefully honed and developed over years of stain-gathering, and have proven to be one of the most stain-forgiving materials known to humankind.

We also used WWI Dazzle Ship camo influences to provide the eye-confusing layer of visual obfuscation. By synthesizing these different methods of stain-obscuring, I think we’ve arrived at an ideal stain-obliterating pattern.

We attempted to use AI assistance in the development of Stain-O-Flage, but were forced to abandon that because the non-corporeal nature of AI simply could not truly comprehend the nature of stains in the real world. It simply lacked the actual frame of reference that we, as beings that have always existed in a world where stains were a danger, know.

We ended up developing the pattern via real-world automated, iterative systems that involved printing, stain testing, and accelerated aging, all on specially designed rigs. The test facility has been subsequently condemned and is being investigated as a potential superfund site, so further development will require a new facility. And, despite reports you may be reading on social media, we are offering counseling for anyone who may have been inside the facility in its later stages.

Stain Dt 2

The resulting shirt looks “great” (our lawyers have advised that I cannot say the shirt looks great without putting that word in quotes) as you can see on our sexy model, David. Yes, at $39.99 it is more expensive than our usual T-shirts, but you have to understand, this is not just printing on some pre-made shirt: the Stain-O-Flage fabric has to be printed and sublimated at a separate (likely offshore, for safety) facility, and only later, after the proper time for curing and off-gassing has happened, can it be sewn into a shirt configuration, by specially-trained threadworkers wearing the appropriate protective gear.

Stain Label

Each Stain-O-Flage shirt is imprinted with the Autopian Labs seal and a partial list of stains we expect the shirt to be able to endure; any similar shirt lacking this franking is not an official Stain-O-Flage shirt, and should be treated with alarm.

This first batch of Stain-O-Flage shirts will be produced based on how many orders we get; it’s sort of a limited run, so I suggest you order quickly! Being part of this pilot run of what is very likely the greatest advancement in personal garment stain-tolerance since the development of rubber clothing, but that has been so comprehensively co-opted by the fetish community that clearly a new, more mainstream option is required.

And that’s where Stain-O-Flage comes in. The new frontier of stain tolerance for everyday use. I encourage all of you to buy a Stain-O-Flage shirt, and then work it, hard. Drip your mustard, lean onto a pool of ketchup, let your transmission fluid drip onto your chest, roll into a puddle of grease, crawl over grass, engage in clothed watersports (all kinds), back into a freshly painted wall, whatever – the point is these shirts mean freedom.

Freedom to be a slob. Freedom to do messy things. Freedom to get dirty, and yet maintain your dignity.

It’s Stain-O-Flage time, my friends. Get messy with us.

[Ed Note: These are made of a polyester type material, like a gym shirt. They fit rather loosely, and they seemed to me, on first wear, to be decently breathable. -DT]. 

Top graphic image: The Autopian

 

 

 

Follow us on:

Share on facebook
Facebook
Share on whatsapp
WhatsApp
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Subscribe
Notify of
137 Comments
Inline Feedbacks
View all comments
1978fiatspyderfan
1978fiatspyderfan
2 months ago

Excellent presentation I am likely to buy one after I am released from concussion protocol. However til then
Is there any sandwich left from the experiment and can it be purchased?
Is the fact that an ICE motor is needed and no EV Motor is compatible once again proof that EVs are inferior to ICE motors?

David Lorengo
Member
David Lorengo
2 months ago

Was really hoping Autopian labs smelled like 90w Lucas gear oil from a 1960s VW transaxle. Cured meats is acceptable but just barely.

Frown Victoria
Frown Victoria
2 months ago

I understand wanting your logo somewhere on there, but you couldn’t have done it in a worse way if you tried. That bit on the bottom looks awful. Like a permanent store tag you can’t cut off. Really detracts from the rest of the shirt.

Last edited 2 months ago by Frown Victoria
DNF
DNF
2 months ago
Reply to  Frown Victoria

Perhaps something as stylized as a Christian LaCroix logo that could be blended into the pattern itself?

Rod Millington
Member
Rod Millington
2 months ago

Did you consider literally making the shirt out of casino carpet?

Dave Larkman
Dave Larkman
2 months ago

Sadly as I have 25 years worth of Lotus branded shirts I no longer give a shit about I have no need for your excellent product.

[blows nose on Type 119 team shirt]

DNF
DNF
2 months ago
Reply to  Dave Larkman

lol

Hoss Hudson
Hoss Hudson
3 months ago

Are these based on the oil shirt you were taking about on the Smoking Tire recently?

Last edited 3 months ago by Hoss Hudson
Tim Cougar
Member
Tim Cougar
3 months ago

I notice it’s not rated for spaghetti sauce. I understand we must all continue to consume our spaghetti in the shower for optimal stain mitigation.

Johnny Ohio
Member
Johnny Ohio
3 months ago

Are these shirts cut the same way the yearly shirt subscription ones are? The sleeves are cut in a way that doesn’t want to fit right with my big ass even though I buy bigger sizes.

MAX FRESH OFF
Member
MAX FRESH OFF
3 months ago

The guys that The Autopian were using in the ad for them looked a lot like me. I’m going, “Okay, I’ve gotta try this place. A lot of these guys look a lot like me.”

Spikersaurusrex
Member
Spikersaurusrex
3 months ago

It’s an “attractive” shirt, but $50 with shipping takes it firmly out of my don’t give a crap wrenching clothing. If it wasn’t polyester, I’d consider buying it anyway, but I find poly very uncomfortable in the humidity. I guess it’s not terrible in a dry climate where sweat actually evaporates.

Westboundbiker
Member
Westboundbiker
2 months ago

My biggest problem with poly is that given the age and previous life most of my cars have, a fair bit of my wrenching is less wrenchy and more weldy. Or grindy. Which makes synthetic material melty and holy.

Frank Wrench
Frank Wrench
3 months ago

That’s awesome! I’m tired of making my own.

Along these lines I found this t-shirt at a thrift store re: auto fluids.

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRBgXwgjZyeYf9CH3kNFGKa0Uv1ja0eOQZO9ldHopXa5g&s

I have no idea who created it and why and only found the image in a forum for pilots.

ADDvanced
ADDvanced
3 months ago

This is absolutely brilliant; my favorite shirts are all heathered grey for this exact reason.

Grey alien in a beige sedan
Member
Grey alien in a beige sedan
3 months ago

All the mentions of stain-resistant carpeting, and Torch didn’t even bring up the carpet from PDX? Yes, the stuff lining the concourses of the vibrant Portland International Airport is indeed the stuff of legends.

It has its own lore and even its own Wikipedia page.

Phonebem
Member
Phonebem
3 months ago

I wonder if the lore is why my 8-yo son was so excited about the carpet at PDX when we landed there last month. I wish I’d have listened more closely, but I was entirely focused on getting to the restroom ASAP because my back teeth were floating…

CSRoad
Member
CSRoad
3 months ago

Somehow I’d have that sucker melted on day one.

My dream Autopian T-shirt would be a 2022 replica made with a single layer black “Nomex” flame resistant fabric.

755_SoCalRally
Member
755_SoCalRally
2 months ago
Reply to  CSRoad

That’ll cost way more than $50 with shipping, however.

CSRoad
Member
CSRoad
2 months ago
Reply to  755_SoCalRally

That would be OK with me, I keep the books, the wife would think usual T-shirt cost and wouldn’t blink an eye.

Now a Stain-O-Flage shirt would get a WTF and a “don’t wear that outside the house or anywhere near me”.

DNF
DNF
2 months ago
Reply to  CSRoad

I think nomex is showing up in military surplus now.
Check for any other chemicals used

Old Fart Parts Guy
Old Fart Parts Guy
3 months ago

A StainoFlage shirt would be perfect for auto parts pros.Need green red black blue and gray. Let me know when they are available

Twobox Designgineer
Twobox Designgineer
3 months ago

Research conducted with the assistance of Aperture Science.

Contrary to media reports that you may hear in coming days, there has been no involvement with Black Mesa.

Bizness Comma Nunya
Bizness Comma Nunya
3 months ago

Instantly did a control-F for Dan Flashes…. I was not disappointed

I will be purchasing one. God damn this is great.

Ferdinand
Member
Ferdinand
3 months ago

Can Mk.02 come on some sort of natural fiber or at least a natural blend?

Spikersaurusrex
Member
Spikersaurusrex
3 months ago
Reply to  Ferdinand

Wool. Wool would be natural. Actually, I agree. I hate polyester.

Ferdinand
Member
Ferdinand
3 months ago

Wool and cotton are my favorites. Either alone or blended together. I’ll allow a small amount of plastic blended in if necessary, but I want to stress small.

Clear Prop
Member
Clear Prop
3 months ago

I want one, but $56 (shirt+taxes+shipping) is a bit steep.

Adding another shirt adds another $10 shipping, so none of the usual discounts on shipping for more items.

Taargus Taargus
Member
Taargus Taargus
3 months ago

I WANT THAT ONE SOOOO BAD

SlowCarFast
Member
SlowCarFast
3 months ago

“David Tracy attempted to dye clothing in motor oil in an attempt to mitigate stains” 

Caution: Stain-O-Flage Shirts are flammable.

Last edited 3 months ago by SlowCarFast
Holly Birge
Member
Holly Birge
3 months ago

Are you going to offer shipping to Canada for this or is this like the gear shift hoodies where I will need to bribe a US-based friend of mine to forward it on to me. I have a friend in Pasadena that owes me a few favors.

Anonymous Person
Anonymous Person
3 months ago

But how resistant is it to battery acid?

-Asking for a friend.

SlowBrownWagon
Member
SlowBrownWagon
3 months ago

It is not, because it’s made with Changli battery dust.

BUT, if you get battery acid on it, you can put jumpers on your nipples and jump start a 2CV. With the crank.

Last edited 3 months ago by SlowBrownWagon
KennyB
Member
KennyB
3 months ago

If it’s polyester, very resistant.

Scott
Member
Scott
3 months ago

This development from Autopian Labs doesn’t surprise me at all.

Like some other folks here of a certain age, I passed my 50th birthday some time ago, and around then is when my metabolism hit the crapper: since then, my midriff dabbles with a late-first-trimester impersonation almost all of the time. Gravity being it’s unrelenting bastardly self, this does tend to lead to stains from various foodstuffs.

Also, I feel the need to point out that I’ve likely already recommended my own durability-via-camoflage applications here when it comes to cars. While not as prolific a hoarder collector as some here, I’ve owned well over a dozen vehicles, with all but one having been purchased (usually well) used. Thus, they all featured countless scratches, swirl marks, dings, dents, rust spots, bird and bug poops, etc… and frankly, I’ve never had the time or desire to delve too deeply into the dark arts of compounding, random orbital polishers, ceramic coats, etc…

So, it’s long been my theory/desire/fetish to have cars produced with their exteriors already finished in a color/texture/pattern that is, itself, an average/concatentation of all the multi-decade-old finishes of daily-driven cars in the real world. I’ve done no actual testing or AI modelling along these lines, but I imagine a surface consisting of multitudes of graphic elements inspired by all the sampled real-world scratches, etc… with the resulting melange perhaps averaging out to a middle grey +/- 20%, maybe with a slight blue, green, or brown undertone for aesthetic purposes, depending on the car’s intended evironment.

The closest analogue I can think of for this is when you’re in an elevator at a multi-level shopping center, and the elevator interior walls were originally covered in smooth, polished stainless steel panels. However, following the inevitable and constant vandalism by miscreant youths scratching their names and assorted profanities into the smooth, shiny surface, management elected to have a contractor refinish the stainless panels by use of a drill-mounted wire brush, resulting in a surface better able to discourage misguided artistic expression.

Yes: a car color/pattern that appears pre-scratched/dinged/rusted ad infinitum so as to effectively disguise actual real-world wear and tear over years of use.

That’s what this new Autopian stain-proof shirt reminds me of. Also, the seats in some particularly funky 1990s JDM kei cars.

I kind of want one of these shirts despite the price, but I’m not wild about synthetics, so I’ll probably procrastinate ordering one for a while.

Erik Hancock
Erik Hancock
3 months ago

Question: Since it is based on dazzle camouflage, will this shirt make me appear to be moving in a chaotic, random direction? Because I could really use that right now.

137
0
Would love your thoughts, please comment.x
()
x