Home » Can You Solve The Mystery Of The Errant Screw In My Mom’s Fiat 500?

Can You Solve The Mystery Of The Errant Screw In My Mom’s Fiat 500?

Cs Momfiatscrew Top

Like many of you, I have a mom. My mom has been around for a long time, and happily she’s still going strong. She’s also still driving, and driving a 2013 Fiat 500 that, when compared to her own shtetl-hobbit scale, is like an SUV. She mentioned the other day that she saw a screw sticking out of the hood of her car and wasn’t sure what it was, which, of course confused me. A screw? Just sticking out of the hood? The hell is going on?

She wanted me to drive the car around anyway because she felt it was sounding loud, so I had her bring it by so I could drive it and listen and all that. Oh, and I could also take a look at whatever the hell was going on with that screw.

Vidframe Min Top
Vidframe Min Bottom

I’m happy to say the car drove and sounded just fine, at least to me. Of course, my standards for what makes for a loud car may be pretty far off what most rational people who don’t daily drive rattly air-cooled tin cans around, but even with that in mind, the car sounded fine to me. Really, that little Fiat has been a remarkably reliable car for my mom, despite those acronyms going on about all those Anthonys, fixing the cars again.
Cs Momfiat 1

My mom’s Fiat is one of the 1957 Edition ones, which means it has nostalgic, old-school Fiat badges, a white roof and mirror caps, chrome bumper inserts, special wheels and chrome hubcaps, and some other detail features to give it a charming even-more-retro look. It also has the 1.4-liter, 101 horsepower naturally aspirated engine, which will sort of factor in later as we look into the Mystery of the Screw, In fact, just this very second, I realized you can see the screw there on the right, by the headlight, in the picture above from when my mom brought her car to the Old Folks Car Show we just had.

Cs Momfiat Screw Close

There’s the screw. Just sort of trapped in there. How long has it been there? Months, at least. I opened the hood to get a better look:

Cs Momfiat Screwhand

The screw was just sitting there, pinned between the hood and radiator support/front fascia. But where the hell did it come from? How did it get there? Based on the way it was stuck in there, it must have been inside the engine compartment and gotten trapped, as opposed to somehow being flung in there from the outside, which would have Final Destination levels of improbablity.

It must have come from somewhere inside the engine bay; but where? I looked around, but didn’t see any obvious places a screw like this would have been. The mystery here, it’s intoxicating!

Cs Fiat500 Engine Ownman

I did eventually figure it out, but I’m not going to tell you just yet, because why steal all the fun? Here’s an image of the engine bay from the Fiat’s owner’s manual, and I can give you a hint: the location of the wayward screw is actually visible here. There’s really not many components labelled in the image, because, well, not many are really all that visible in the little bay. That battery takes up a good chunk of space at one end, then the engine coolant reservoir at the other side, and a lot of plastic engine cover in the middle.

So where do you think this screw came from? Take a moment to think about it, and here, while you’re considering, you can watch Charlie Sheen drive a Fiat 500 Abarth around inside a house while he’s under house arrest and having a party, a party where the dangers of carbon monoxide poisoning are likely being prevented with copious amounts of cocaine.

Okay, think you know from whence the screw came? Here’s where it was from:

Cs Momfiat Screwinplace

The air cleaner housing. The screw on the passenger side! I suspect it was left when she had the car serviced last, and they changed the air filter. I changed her battery a bit before this, earlier in the year, and this must have happened after that. But I think it’s been like 3 or 4 months? Can that be right?

Anyway, I was glad to have figured it out. Otherwise, that screw would still be driving me bonkers.

 

Follow us on:

Facebook
WhatsApp
Twitter
LinkedIn
Reddit
Subscribe
Notify of
55 Comments
Inline Feedbacks
View all comments
Ben Nuttall
Ben Nuttall
1 month ago

That’s a lovely car, great colour. In the UK, most fiat 500s are sold with the 1.2 8v FIRE engine. A legendary engine, utterly impossible to break.

Unfortunately, the same cannot be said for the 5 speed manual attached to engine. They tend to leak from the main shaft seal and destroy the bearing.

I find it strange that all of the Fiats sold in the USA were fitted with the Multiair engines. The 500 is supposed to be a frugal little city car, why fit it with a complex engine that is expensive to maintain (short oil changes), and expensive to repair (Multiair units cost a bomb).

Though having said that, you guys never got to try out the infamous twinair. A two cylinder 0.9L engine providing 105bhp.

Fantastic to use, torque in places that you don’t expect, great fuel economy. So terribly, terribly delicate… Shame really.

Andy Individual
Andy Individual
1 month ago
Reply to  Ben Nuttall

I’m convinced Italian engineers aspire to designing an engine with the displacement of an espresso cup and then forcing as much pressure into as possible.

Ben Nuttall
Ben Nuttall
1 month ago

You know, I think you might be onto something ???? My current car is a Giulietta 1.4 Multiair 170. In 2010 when it was first released, 170bhp from a 1.4 engine was pushing the boundaries.

Somewhere down the line though, Toyota seemed to get the same bug, and that’s pretty much it for Fiat’s claim to the small engine-big power title.

Andy Individual
Andy Individual
1 month ago

That’s the new Stellantis badge.

TriangleRAD
Member
TriangleRAD
1 month ago

Hey my ex’s 500 is missing one of those air box screws. Maybe that one’s under your mom’s hood, too!

This reads like a “your mom” joke, but it really isn’t.

Torch, I’ve also experienced the overall dependability of a well-maintained 1 4L 500. Remind me to tell you about the time MultiAir saved ours from engine damage due to oil starvation.

If your mom’s little Fiat does start giving her trouble, be sure to let me know. I know a few tricks.

Rick Cavaretti
Rick Cavaretti
1 month ago

Great service facility, leaving screws out of the air filter box.

DysLexus
Member
DysLexus
1 month ago

Hey Guys you’re looking at this all wrong. This is a HUGE Fiat success for the body engineers. They spent countless hours ruminating over the proper panel gap spacing so that no screw be left behind. AND the assembly technicians kept that proper panel gap spacing. Quality work. Now break open the fine wine team, carefully.

Jeff H
Jeff H
1 month ago

I would have thought Jason’s standard operating mode is bonkers and this episode was driving him beyond bonkers.

Mechjaz
Member
Mechjaz
1 month ago

Without looking at the answer, it looks like a plastic (as opposed to wood/metal/machine) screw, so I’m guessing the air box, and it just happened to be trapped just so after the last time the air filter was checked/changed.

Tong Thrower
Member
Tong Thrower
1 month ago

/thread

Pete M Wilson
Pete M Wilson
1 month ago

I could see it having come from the outside and wedging itself in there – reminds me of the C&D (or R&T) long term Cayman that they discovered a steak knife stuck in the underside in a narrow slot beside the door.

Also, I don’t see why it would be left on the edge of the engine bay when it was removed so it had to fly over there instead of out to the ground and that seems pretty improbable as well.

Canopysaurus
Member
Canopysaurus
1 month ago

No offense, but isn’t your mom a little a little senior for having errant screws in a Fiat?

Richard Truett
Member
Richard Truett
1 month ago

With apologies to Peter Clemenza: “Leave the screw. Take the cannoli.”

Cheap Bastard
Member
Cheap Bastard
1 month ago

Next up: The Mystery Of The 10mm Socket.

Nick Fortes
Member
Nick Fortes
1 month ago

I’ve got a loose washer in the hood of my GTI. I was installing a hydraulic hood strut and dropped a washer it went down in the frame of the hood somewhere. I tried an extendible magnet but couldn’t find it. Very rarely I will hear it when I close or open the hood, but not always which is strange.

Parsko
Member
Parsko
1 month ago

Well, we now have real evidence behind those acronyms. Screws are actively throwing themselves away from the car. Like a reverse tuck everlasting or something to the sort.

Fiat engineers to management: ” We have figured out the source of eternal revenue”

Rick Cavaretti
Rick Cavaretti
1 month ago
Reply to  Parsko

Actually, we don’t. Most of them originated in a period of American history besieged with racism. Fiat doesn’t hold that place overseas.

Nlpnt
Member
Nlpnt
1 month ago
Reply to  Rick Cavaretti

It was also a period where a much higher percentage of the population lived in the Northeast and upper Midwest and they were starting to spread a lot of salt on the roads half the year…

Tbird
Member
Tbird
1 month ago

I really prefer spring clips or captive bolt/metal threadsert for airboxes. Coarse threads into plastic just feels half-assed.

Last edited 1 month ago by Tbird
Rollin Hand
Member
Rollin Hand
1 month ago
Reply to  Tbird

Carlos Tavares: “But I was using my whole ass.”

Jonathan Green
Member
Jonathan Green
1 month ago

It’s a Sicilian Message. It means Luca Brasi drives a Fiat…

Carbon Fiber Sasquatch
Member
Carbon Fiber Sasquatch
1 month ago

Is it really a Fiat without a few screws loose?

Robert M. Graham
Robert M. Graham
1 month ago

That actually applies to the drivers …

Sid Bridge
Sid Bridge
1 month ago

Not sure I would have stayed as calm as Jason had I gotten a call like that from my mother.

Mom: Hey Sid. Can you give me some advice? I have a screw loose.
Me: Well, I knew that, Mom.
Mom: No, seriously. Everything is shaky now and I think it’s because of a screw.
Me: Please don’t describe this in any more detail.
Mom: I’m coming over so you can look at my car and discuss your dwindling inheritance.

Rollin Hand
Member
Rollin Hand
1 month ago
Reply to  Sid Bridge

When my late mom was in the hospital due to a sarcoma on one of her vertebrae (dark times), they took a hunk of bone from her thigh and attached it to bridge the problem vertebrae to another one using screws. The bone was so soft one the screws came out. When she told me I said “well, there’s one thing. You’ve been medically proven to have a screw loose.”

She initially was less than pleased, but started laughing within seconds.

Hug your folks while you can.

Urban Runabout
Member
Urban Runabout
1 month ago

*stifling comment about people with a loose screw*

Flyingstitch
Flyingstitch
1 month ago

I’m no connoisseur of screws, but I could tell right away it was the kind of thing I would try to replace with a zip tie after losing it.

Mechjaz
Member
Mechjaz
1 month ago
Reply to  Flyingstitch

Connoiscreur is the term, I believe.

.. And in typing this joke I’ve realized I kind of do love fasteners and screws in particular.

Rollin Hand
Member
Rollin Hand
1 month ago
Reply to  Flyingstitch

I always lose it when I have a screw loose.

Mighty Bagel
Member
Mighty Bagel
1 month ago

…which means it has nostalgic, old-school Fiat badges, a white roof and mirror caps, chrome bumper inserts, special wheels and chrome hubcaps, and some other detail features…

… like loose screws to complete the charming, classic Italian car feel.

Mrbrown89
Member
Mrbrown89
1 month ago

Cucù! – Peekaboo in italian

Fruit Snack
Fruit Snack
1 month ago

The logistics of a screw in a Fiat 500 are too much to contemplate this early in the morning.

Steve's House of Cars
Member
Steve's House of Cars
1 month ago

As soon as I saw the coarse threads and the wide shoulder I knew it was the airbox. Typical FCA screws…

Lincoln Clown CaR
Member
Lincoln Clown CaR
1 month ago

I thought I was looking at a wood screw of some sort.

Scoutdude
Scoutdude
1 month ago

That design with the 8mm hex/screw driver slot is used on a lot of air boxes from a number of different brands. Though usually they are captive.

Steve's House of Cars
Member
Steve's House of Cars
1 month ago
Reply to  Scoutdude

Having recently done the air filters on two FCA products, I can assure you theirs aren’t captive. Though, the threads are just wide enough they kind of don’t fall out if you are careful. But who is careful with an FCA product??

Ferdinand
Member
Ferdinand
1 month ago

Threads into plastic; probably through a decently thick plastic piece to start with. Something on the intake path sounds most likely to me, but I don’t think I’ve owned a car that the airbox has loose screws to lose during a filter replacement.

GirchyGirchy
Member
GirchyGirchy
1 month ago
Reply to  Ferdinand

Yeah, the last vehicle I owned which required threaded fasteners to replace the air filter was built in 1985. Most companies have moved past that.

Last edited 1 month ago by GirchyGirchy
Steve's House of Cars
Member
Steve's House of Cars
1 month ago
Reply to  GirchyGirchy

Have you driven an FCA lately? (In the style of the old commercial)

GirchyGirchy
Member
GirchyGirchy
1 month ago

Yes, but only rentals. I’m often tempted to put some decent wiper blades on them (WTF is it with rentals?! I swear, I can get one with 1k miles on it and they still suck!), but have never desired to perform any maintenance on one.

55
0
Would love your thoughts, please comment.x
()
x