Home » How Someone Cut Up A Dodge Charger Daytona To Create This Magnificent Ute

How Someone Cut Up A Dodge Charger Daytona To Create This Magnificent Ute

Diyute
ADVERTISEMENT

If you’re looking for a vehicle with the utility of a pickup truck but the form factor of a car, a ute is what you want. However, America never got modern utes. I suppose the Ford Maverick and Hyundai Santa Cruz come close, but not quite there. If you want a modern ute, you’re going to have to find a converted one. Thankfully, there’s a company that specializes in making kits for utes and when done well, they’re spectacular. This 2006 Dodge Charger Daytona R/T has a 5.7-liter Hemi V8 under the hood and a Smyth ute conversion.

I had this ute saved in my Marketplace list and was going to feature it on Friday’s edition of Mercedes’ Marketplace Madness. However, the more I looked at this thing, the more I fell in love. I’ve seen many ute conversions, but only a handful looked this good. If I didn’t know any better, I would say that this looks like something Chrysler could have built from the factory. Just take a look at it from another angle:

Vidframe Min Top
Vidframe Min Bottom

342200459 620532129922477 245666

And it’s not too crazy to think that an American automaker would build such a thing. Bob Lutz once tried to bring over Holden Utes to rebadge them as Pontiacs! That didn’t happen, but utes still have enough of a following in America that there are shops that specialize in importing ute parts from Australia and converting them into road-legal vehicles in the United States. You can get a Holden Ute from Left Hand Utes or if you’re feeling more adventurous, Smyth Performance sells ute kits for a variety of vehicles. [Editor’s Note: In college I helped create a rear-motor convertible VW Jetta using a Smyth kit. -DT].

From The Mind Behind Factory Five Racing

B584b6 0274f137a27f4e85bcc0d622a
Smyth Performance

Smyth Performance is a Rhode Island-based manufacturer that specializes in kits to transform a variety of vehicles into utes. Currently, the site advertises ute kits for Volkswagen Beetles, Golfs, and Jettas, Dodge Chargers, Subaru Imprezas, Audi A4s, and even Jeep Grand Cherokees. Do you own a fifth-generation Volkswagen Jetta and wish it had a little more spice? Turn it into a pickup truck!

ADVERTISEMENT

The story of Smyth begins in 1993 with Mark Smith. As the site explains, Smith was a chemist working on earning his MBA while working in the R&D division of Avery-Dennison, a company specializing in material sciences and packaging solutions. Working out of a small garage, Smith built a replica of a Shelby Cobra. Factory Five Racing was incorporated in 1995 and the site describes what happened from there:

As CEO of FFR he led the company from zero to 12 million in sales in an amazing 7 years. FFR became the largest component car manufacturer in the world and shipped over 10,000 kits to home car builders and professional shops over the next 25 years. Mark left the day to day management of FFR to Dave in 2002 after successfully defending FFR from the $10 million federal trademark case filed by Carroll Shelby and Ford. He later sold all of Factory Five to younger brother Dave in 2012. While the sale was progressing he joined forces with Harvard MBA and Marine Jay Rogers and co-founded Local Motors, Inc., which created a worldwide network of vehicle micro-factories and was based in Chandler, AZ. LM developed vehicles as outrageous as the “Transformers” featured Rally Fighter, the world’s first 3d printed car and an amazing autonomous shuttle.

B584b6 0cd9a377a56c46d492c33a9bf
Smyth Performance

After selling Factory Five, Smith opened up Smyth Performance. This time around, Smith wanted to focus on kits that used existing platforms and could be built by an enthusiast and driven daily. Smith apparently signed a non-compete clause with Factory Five that limited him to producing kits for Volkswagens. As a result, Smith set his sights on the MkIV Volkswagen Golf/Jetta platform that ran from 1999 to 2005 here in the United States. Smith saw a lot of opportunity in using the Golf/Jetta because it had a variety of engines ranging from a gasoline turbo four and a turbodiesel to the legendary VR6. Smith also liked the dashboard and floorpan.

Early Smyth cars were Golf/Jetta-based mid-engined sports cars and apparently, Smith specifically loved the idea of a mid-engine diesel sports car. Here’s an example of a Smyth GF3:

Ls1g8a9dqxmh1qkrdym0
Craigslist Seller

Smith would later refine his business. The mid-engine sports cars were gone and in their place were a variety of utes. The goal behind these is to create trucks that retain the same performance of the base vehicle:

The founding principle of Smyth Performance is to use as much of the modern automobile as possible in the build of a component car. Everything that makes the car work remains where it originally is supposed to be, we simply designed a complete system of panels and sub-frame assemblies to reinforce these already robust platforms and transform them into a beautifully strong small truck. The result cruises the highway like the sporty cars that they are, while allowing you to use a 5-6 foot bed(7 foot plus with the functional steel tailgate down) for your stuff that you carry with you in life. An extruded aluminum 1/8″ thick bed floor bolted to a thick “b” pillar plate support structure and thick aluminum bed walls, allow the street cruisers a beautiful custom finish while providing the strength and durability that make it a great work truck when needed.

Building A Dodge Charger Daytona Ute

342196142 726822222559073 201762

ADVERTISEMENT

Smyth Performance offers ute kits for 2005 to 2010 Chargers and 2011 to current Chargers. Yes, that means if you were feeling wild enough, you could make a Demon ute if you wanted to. Smith says that the Charger ute kit converts your sedan into a truck with a 6-foot bed that’s 5 feet wide outside of the wheel wells and space slopes down from 4 feet at the top of the wells to 3 feet at the bottom. The end result is a camper that Smyth Performance says should give you a payload of about 900 pounds.

Oh and you’ve probably already noticed this, but if you haven’t, yes, those are taillights from a Dodge Grand Caravan. If you haven’t quite figured out the rear window yet, that comes from a Chevrolet Colorado.

342188434 1650853788669031 78882

Looking through the build manual, there’s nothing that stands out as too difficult to handle. It seems to me that if you can turn a wrench and use a reciprocating saw, you can probably construct a Smyth kit. That said, I will say that it seems somewhat scary. I mean, you’re chopping up a perfectly good car. This is a project that you have to commit to because once you cut up your car, there’s no going back.

Flipping through the manual, aside from cutting, you’ll be working with bolts and rivets. Your cuts don’t have to be perfect, but close enough for the parts to fit. The manual also mentions some bonding involved if you aren’t as fond of rivets, but these kits do not require any welding.

ADVERTISEMENT
Chargercut
Smyth Performance
Support
Smyth Performance

As mentioned above. Your bed will be aluminum and 1/8-inch thick, surrounded by aluminum bed walls and an aluminum support structure for your car’s B-pillar. Of course, these cars aren’t crash tested and cutting up a unibody car’s supporting structure is typically bad news for strength. The kit does allow the car to retain functional airbags for the remaining seats. Some Smyth utes have gotten into crashes and they seem to do OK.

Smyth’s Dodge Charger ute kit currently costs $3,790. That’s on top of the price of the donor vehicle and of course, you have to build the thing and paint it when you’re done. If you don’t have that kind of time on your hands, you could just buy a ute built by someone else! That’s the proposition offered by this 2006 Dodge Charger Daytona R/T ute.

341517615 787205146079686 661895

The Dodge Charger Daytona R/T made its debut at the 2006 Chicago Auto Show. Power comes from a 5.7-liter Hemi V8 making 350 HP and 390 lb-ft torque. That reaches the rear wheels through a five-speed automatic. Daytona R/T models got their own colors, badging, and a special interior with embroidered Daytona logos, body color-matched stitching, and more. In addition to the cosmetic changes, Daytona R/Ts also got a sport suspension.

It’s unclear if the sport suspension remains, but the factory 18-inch wheels were swapped out with 20-inch wheels from a Hellcat. I think they rock in this application. The seller notes that the powertrain has been left stock.

ADVERTISEMENT

342202548 911613450105872 913084

Really, this whole build works really well. It’s unclear who built this, but it looks like it could have rolled out of the factory this way. I also like how the donor car doesn’t appear to be worn down and on its last legs. There doesn’t appear to be any rust and it has 97,579 miles on its odometer. The seller, based out of Fayetteville, Arkansas, wants $18,500 for it. Is that too much? I don’t know, but I bet it’s a ball to drive.

(Images: Seller, unless otherwise noted.)

Support our mission of championing car culture by becoming an Official Autopian Member.

Relatedbar

ADVERTISEMENT
Share on facebook
Facebook
Share on whatsapp
WhatsApp
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Subscribe
Notify of
30 Comments
Inline Feedbacks
View all comments
Ron888
Ron888
1 year ago

That’s a great looking machine.Super impressed

Captain Zoll
Captain Zoll
1 year ago

I’ve been toying for a while with the idea of getting one of these kits, and putting it on a 300C, (then redoing the bodywork to fit, maybe use ram taillights instead) and paint it up like either a chrysler valiant wayfarer or charger.

Ron888
Ron888
1 year ago
Reply to  Captain Zoll

Yes,please do this! Just be sure to use a V8 version

Silent But Deadly
Silent But Deadly
1 year ago

The obvious next step in this nod to an Australian anachronism is a Panel Van…

Joe The Drummer
Joe The Drummer
1 year ago

As long as it has a 1977-78 Firebird “mean look,” “Bandit” nose on it.
https://www.curbsideclassic.com/wp-content/comment-image/558731.jpg

rctothefuture
rctothefuture
1 year ago

I’ve wanted these for a long time. Jared from the Questionable Garage built one, which was sadly crashed by a friend, but he converted it from a damaged cop car. I’ve been searching for a rear-ended R/T for cheap to justify the costs.

GhosnInABox
GhosnInABox
1 year ago

If that ATL sequel ever gets out of development hell, this should be the star vehicle.

Mr Sarcastic
Mr Sarcastic
1 year ago

That is a splendiforous looking Ute. However I am getting an image of this in an old car catalogue. It looks pretty but when you do it yourself? Well you will lucky it it runs, maybe that plywoodtruck we saw yesterday.

Dodsworth
Dodsworth
1 year ago

It look so good it can make you doubt your own memory. “How could I have forgotten this?” Cue Doctor Who theme.

James Kohler
James Kohler
1 year ago

This thing is a real guilty pleasure/temptation, which potentially speaks to my financial ignorance, but I would absolutely love to drive this thing.

Jason's Cargonaut
Jason's Cargonaut
1 year ago

So glad they left out the oxford comma from this sentence:

LM developed vehicles as outrageous as the “Transformers” featured Rally Fighter, the world’s first 3d printed car and an amazing autonomous shuttle.

Now I’m imagining a 3d-printed autonomous Rally Fighter as a shuttle taking me to the airport.

TOSSABL
TOSSABL
1 year ago

Upvoted for the sentiment-and for mentioning the Oxford comma

Phyrkrakr
Phyrkrakr
1 year ago

I think I spotted a (highly customized) version of the Beetle one a while back. Somebody went full rat-rod with the thing:
https://opposite-lock.com/topic/59215/dots-beetle-thing/1?_=1683146697451

Arrest-me Red
Arrest-me Red
1 year ago

I love and hate this at the same time.

S13 Sedan
S13 Sedan
1 year ago

There was a Smyth kit converted WRX in my area a while ago and I remembered being genuinely impressed with the build quality and how it seemed like it would be actually usable as a truck. Obviously it wouldn’t have a ton of payload capacity but it would probably work just fine for 95% of the things truck owners use their truck beds for.

PaysOutAllNight
PaysOutAllNight
1 year ago

Love the Charger Ute. Makes me wonder how hard it would be to do a Chrysler 300 Ute, simply because I prefer the look of the 300’s front end.

Drive By Commenter
Drive By Commenter
1 year ago

Interesting.

Metal bonding adhesive > rivets. One continuous bond beats lots of holes and mechanical fasteners. Done correctly, which is fairly easy to accomplish, the adhesive is stronger than the metal.

LarsVargas
LarsVargas
1 year ago

As a Hyundai Sana Cruz owner, I can confirm they are not utes. Pretty close, but no. And it’s not really a truck. More of a trucklet. But it does all the truck stuff and all the car stuff I need it to do. So it fits me well and I’m happy with it.

This Dodge is pretty damn compelling, though.

SYKO Simmons
SYKO Simmons
1 year ago

If this guy didn’t put a RAMPAGE emblem on it….he needs to be punched in the face!

Col Lingus
Col Lingus
1 year ago

The result looks ok considering what it is. But cutting apart a unibody car is never the correct answer. Just not a wise choice without major changes to what remains to ensure structural integrity. Sorry but for the asking price and result, I have to vote crack pipe here. Maybe just buy a real truck?

Dogisbadob
Dogisbadob
1 year ago

ooo a new Rampage 😀

BunkyTheMelon
BunkyTheMelon
1 year ago
Reply to  Dogisbadob

There’s one coming….

Ben
Ben
1 year ago

If I had the free time this would be a very tempting project. The donor cars can’t be that expensive at this point and the kit isn’t bad either.

Dennis Birtcher
Dennis Birtcher
1 year ago

I’ve been enjoying the ever-evolving build on The Questionable Garage’s YouTube channel (formerly Wrench Every Day). Good to see more of these in the wild! As a former El Camino owner, I approve.

Doug Kingham
Doug Kingham
1 year ago

I came to say the same thing. Jared Pink’s build has been fun to watch. I’d love to try doing it myself one day.

Squirrelmaster
Squirrelmaster
1 year ago
Reply to  Doug Kingham

I also came to say the same thing. Jared is a lot of fun to watch.

Rollin Hand
Rollin Hand
1 year ago
Reply to  Squirrelmaster

I came to say he same thing as well. That car…er ute has been to hell and back more than once now. So much so it’s now a Hellcat.

BolognaBurrito
BolognaBurrito
1 year ago

Imagine doing all that work, and then slapping on a stick-on fake hood scoop.

Ranwhenparked
Ranwhenparked
1 year ago
Reply to  BolognaBurrito

And the DLO fail on the b-pillar. Honestly,the lines look fine as-is, it doesn’t need that

10001010
10001010
1 year ago

+1 for the working tailgate!

30
0
Would love your thoughts, please comment.x
()
x