Home » I’m A Scientist And I’m Going To Break Down The Physics Of That Crazy Tesla Jump

I’m A Scientist And I’m Going To Break Down The Physics Of That Crazy Tesla Jump

Teslajump Top
ADVERTISEMENT

At the bottom of Los Angeles’s Baxter Street, a Tesla Model S flashes its brights. It zooms up the hill towards a group of people tracking it with cell phones held at arms’ length. As the Model S reaches the top it takes flight like a hurled brick, clearing the hill’s peak and falling down the other side until the car’s nose plows into the ground in a hail of sparks.

Vidframe Min Top
Vidframe Min Bottom

[Remember this video? It was absolutely everywhere the week before we launched The Autopian. Every site was mostly just holy-crapping the whole thing, gawking at that heavy-ass Tesla swan-diving into the pavement, sending trash cans flying and trashing that poor bastard’s Subaru. But we wanted to know why. What is it about this hill and this car that made for such an astoundingly dramatic jump? What’s going on here? Why did this happen? So we reached out to a real physicist, and now you’ll have the answers you deserve. –JT]

This video raises a lot of questions. Why did the driver think this was a good idea? Did they regret their life choices when the rented Tesla smashed up a dude’s Subaru Forester so bad the AWD wagon got its own GoFundMe? Will the Tesla pilot ever be able to rent a car again? No, seriously, why did the driver think this was a good idea?

Those are sensible questions, but I’m not here to answer those. I’m here to answer the really important questions: How in the name of physics is that jump possible? And why did it rotate nose down?

ADVERTISEMENT

Hi, I’m Stephen Granade. I’ve been fielding Jason Torchinsky’s bonkers physics questions about cars for years. And I’m so glad I get to do it again for The Autopian.

It’s remarkable to see that Model S catch air because it’s a chonker of a car. It weighs in at almost 5,000 pounds or, to use more scientific units, two 2007 Honda Fits. Thanks to its battery pack, its center of gravity is low and near the middle. In fact, it’s a touch tail-heavy, with 52% of its weight in the back. How does a car that heavy get off the ground in the first place and, with a heavier tail, go nose-down during its ignominious flight?

Lucky for us, physics can help answer those questions. Let’s look at the forces on a car that keep it on the road. There’s gravity, of course, and there’s downforce from the air rushing over the body, push the car down. In response, the road pushes up on the car’s tires to keep the car from sinking into the Earth. I’m going to ignore downforce because figuring that out without an air tunnel or a good complex fluid dynamics simulation is hard, and I’m lazy. I feel pretty good about that decision. The Tesla’s optimized for long range, which led designers to limit downforce due to it adding drag. The car in the video was also going relatively slowly. Downforce scales as the square of the velocity. If you double your speed, you quadruple the drag. At the Tesla’s relatively low speed up the hill, the force of gravity will dominate.

I can visualize the forces acting on the car by drawing arrows where they’re applied. Gravity effectively pulls at the car’s center of gravity, while the road pushes up on the tires. By the way, I learned how to make these drawings in my physics class on Statics, which is like a kindergarten drawing class but with math.

ADVERTISEMENT

The diagram [don’t get worked up, it’ll be explained why it’s a brick soon — JT] changes when you’re on a hill like the one on Baxter street. Gravity still pulls straight down, but now the road pushes against the tires at a slant. Only the part of the gravitational force that points towards the hill keeps the car on the hill. The other part of it wants to drag the car back.

The hill on Baxter is ridiculously steep. It’s so steep that a few years ago, tired of cars getting stuck or sliding back down it, Los Angeles made it one way in both directions from the hilltop. It’s a 32% grade, which means that it’s at an angle of nearly 18 degrees. The Google Street View from the top shows how steep it is. But the steepness alone isn’t why the car went flying. The hill’s rounded top is what sealed the deal.

Check out that street view again. The top is narrow (i.e. it has a sharp peak), about 20 feet wide, and slightly rounded. It’s so narrow and rounded that buses and limos used to get stuck on it. As the Tesla reached the top, the hill curved down beneath the Tesla faster than the Tesla could follow it.

Now we get to talk about Dynamics — the other half of my kindergarten-drawings-plus-math class. As the hill curved over, the Tesla wanted to keep going in a straight line because of its inertia. The force between the ground and front tires dropped as the nose rose relative to the curving hill. When that happened, the force of gravity produced a torque around the back tires to bring the nose back down and keep the front tires on the ground. That torque equaled the force, which is the car’s mass times the acceleration due to Earth’s gravity, multiplied by the moment arm, which is the perpendicular distance from the force to the point the car’s rotating around.

ADVERTISEMENT

However, that rotation doesn’t happen instantly thanks to the car’s moment of inertia. The moment of inertia basically represents a body’s aversion to rotation. Just as mass determines how hard it is to speed up or slow down a car, moment of inertia determines how hard it is to make a car rotate. The car’s acceleration is the force applied to it divided by its mass; its rotational acceleration is the torque divided by its moment of inertia.

The moment of inertia depends on how mass is distributed across an object. Figuring it out exactly is hard, but since the Tesla has a heavy undercarriage and is square-ish, I can get close by using the moment of inertia of a brick. (See? There’s more than one reason I called the Tesla a brick). The brick Tesla’s moment of inertia, “I,” is proportional to the mass times its length squared plus height squared.

In the rotational acceleration equation above, the moment of inertia depends on the car’s mass, but so does the torque, since the force due to gravity (mass times linear acceleration) is causing the torque. In the arithmetic, the masses cancel out, so clearly it didn’t matter that the Tesla Model S is a heavy car. What mattered was that the Tesla was traveling fast enough that the torque couldn’t rotate the car quickly enough to keep its front tires on the ground.

That helps explain why it could go airborne, but what about it pitching nose first? Again, it’s because of the torque. Even after the front tires left the ground, gravity kept torquing the car around its back wheels, rotating the car forward, its nose going down. When the back tires left the ground, however, that torque stopped. Gravity stopped torquing the car and instead pulled it inexorably down the other side of the hill to its spark-filled crash. Without that torque, the Tesla kept the rotational speed it had when it took flight (i.e. the nose dropped at a constant rate after flight). That’s the conservation of angular momentum.

ADVERTISEMENT

I estimated the car’s speed with video analysis software. It flew over the hill at nearly 14 m/s, or 30 MPH. For 0.2 seconds, the car’s back wheels were still on the ground before they, too, went airborne.

I crunched the numbers and estimate that gravity pulling the nose down over the hill crest rotationally accelerated the car at 200 degrees per second squared. That’s a lot, but the car was moving so fast that even that rate of rotational acceleration couldn’t keep the car’s wheels on the road. By the time the back wheels left the ground, the car was rotating at 37 degrees per second. If it started at the hill’s angle of 17.74 degrees, it should have been level 0.5 seconds after the front wheels first left the road.

I double-checked the video. The Tesla levels out a half a second after the front tires leave the ground. Not bad, especially given the approximations I made.

From there, things got worse for the Tesla. As it pitched forward, the air no longer hit the nose of the car and glided smoothly over it. Instead, it smacked into the windshield. It’s like the driver popped a windsail. At first that would have slowed the Tesla’s rotation, but if the Tesla had a long enough flight, it would have sped up the rotation once the nose was low enough.

ADVERTISEMENT

I got curious to see if you could stop the spin by stomping on the accelerator. Because angular momentum is conserved, making the car wheels spin forward faster would make the car itself rotate backwards to compensate. Tesla’s slipstream wheels are 13 kilograms. If the car was going 30 MPH, and then you spun the wheels fast enough to move the car at the 2018 Model S’s top speed of around 140 MPH, then the wheels’ angular momentum would increase to 1,063 kilogram meters squared per second. (When we talk about rotational motion, the units look squirrely. Just go with them.). That would make the 2200 kilogram Tesla rotate backwards by 9 degrees per second. Given that it’s rotating forward at 37 degrees per second, shaving 9 degrees per second off of that won’t save the driver.

For my analysis, I simplified by assuming that the car wasn’t accelerating or decelerating when it went airborne. If it had been, that would have introduced a force at the back axles which would have made the car’s nose-down rotation less (if accelerating) or more (if decelerating). Even if the driver had stomped on the accelerator right before the jump, the Tesla’s 0-60 MPH time matches an average acceleration of 9 m/s^2. That’s comparable to gravity, but that force’s moment arm around the bottom of the tire would be around 0.2m, compared to gravity’s moment arm of 1.26m. And that’s assuming the driver floored it at the last second before going airborne.

Phew! That was a lot of math to say “physics says the Tesla should have done what it did, even if the driver shouldn’t have done what he did.”

Share on facebook
Facebook
Share on whatsapp
WhatsApp
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Subscribe
Notify of
37 Comments
Inline Feedbacks
View all comments
Sklooner
Sklooner
1 year ago

I started to check your work but ran out of fingers

Rafael
Rafael
1 year ago

I just clicked in to see the crazy video, now I’m deep in the comments after reading the entire piece. And this is just my first story of the day! How did this happen? AAAAH!
Well, who needs to be productive at work, right? 🙂

WR250R
WR250R
1 year ago

Snowmobilers know this. When you’re in the air and you want your front end to come down hit the brake. If you want to lift the front before landing stab the throttle. That heavy track slinging around beneath the sled can totally change the momentum

Ron888
Ron888
1 year ago

Nice breakdown Stephen!
I have a small question on suspension rebound.Does the rear suspension rebounding after (or later) than the front suspension have much effect on mid air rotation?
Or have i just confused this with one of the factors you already mentioned?

Donald Petersen
Donald Petersen
1 year ago

I used to live around the corner on Lake Shore and drove over this hill every day back in 2005. And I gotta admit, I have always wanted to see someone do this, though preferably under much more controlled circumstances. The amazing thing to me was that the dude was only going 30. The hill is quite steep, but I bet under full throttle from the bottom of the hill a Model S could have gone much faster, which, based on the result of the 30 mph run, makes me imagine a full throttle run might have resulted in the car not landing at all until it got all the way down to Allessandro at the bottom of the hill. Or just reaching escape velocity and going into orbit.

A small and preferably ignored part of my soul is sad that we’ll never see it. If Teslas had existed in 1977, Hal Needham would have shot it.

BigThingsComin
BigThingsComin
1 year ago

Nice breakdown, nerd.

HT
HT
1 year ago

Awesome, awesome stuff.

Mr E
Mr E
1 year ago

All those equations make about as much sense to me as why the driver jumped the car in the first place.

But I appreciate the effort! ????

Mr.Asa
Mr.Asa
1 year ago

This reminded me of something:
“I got curious to see if you could stop the spin by stomping on the accelerator. Because angular momentum is conserved, making the car wheels spin forward faster would make the car itself rotate backwards to compensate.”

There was, I think, a Peugeot rally car that when going over jumps would actually have its rotation changed based on what the driver was doing with the loud pedal. The Peugeot was a much lighter vehicle than the Tesla to be sure, but I think it may have also been a Mid-Rear vehicle, which could/should have helped the rotational effects.
I can’t remember where I first heard this, but it feels like a Top Gear tidbit.

Holvey
Holvey
1 year ago
Reply to  Mr.Asa

You can see this at play in dirt bike racing like Supercross. When the bikes are in the air, riders will do all sorts of input to get the wheels to land in the best position for traction and speed, but also to correct problems from takeoff. Because dirt bikes are so balanced, you can see them grab the front brake to get the nose down, or pin the throttle to keep the front tire up.

Mark Tucker
Mark Tucker
1 year ago
Reply to  Holvey

Yep, you can do this with RC cars to some extent too.

Duncan Findlater
Duncan Findlater
1 year ago
Reply to  Mr.Asa

Anyone who’s ridden a BMW boxer motorcyle will also tell you about how the torque reaction from the engine can make the bike move to one side. The crank shaft is parallel to the bike as compared to perpendicular for most in-line four bikes. I only ever noticed this boxer effect at a standstill, but some riders complain about it under acceleration too.

daveman
daveman
1 year ago

Where can I place my deposit for the Tesla Brick?

SlowCarFast
SlowCarFast
1 year ago
Reply to  daveman

Bury your deposit in your back yard for 5 years, submit a request to get it back, then dig it up after the sixth year.

Kevin Roust
Kevin Roust
1 year ago

“If you double your speed, you quadruple the velocity.”
downforce

Frankencamry
Frankencamry
1 year ago

Now I would like a comparison based on relatively large wheeled jumping vehicles as it pertains to controlling landing angle.

Specifically, Monster Trucks. At 1/4-1/3 of the vehicle weight, could one of them have landed this jump properly via throttle application?

I’m betting yes, but this is a lot bigger than a stadium ramp.

Ron888
Ron888
1 year ago
Reply to  Frankencamry

My experience in racing motocross says absolutely yes.
I cant be bothered doing the math but if we can make in-air adjustments with brakes and throttle they – with their high HP and heavy wheels ,as you say- certainly could. The only immediate limit would be gear ratios.If the trans and/or torque converter cant upshift fast (or far) enough, the effect is limited
Setup a monster truck right and it’s flight angle could be controlled perfectly on that street jump 😀

JoeJoe
JoeJoe
1 year ago

I presume a small error creeped in in the beginning of the article.

“Downforce scales as the square of the velocity. If you double your speed, you quadruple the velocity.”

I like it the way it’s written and it would be a straight Torchinsky concept, but the physics wouldn’t agree 🙂

It’s a great article by the way and I hope Autopian goes on with the eclectics, love it to bits!
Cheers!

Rad Barchetta
Rad Barchetta
1 year ago

If it went airborne at only 30mph, it’s a wonder more cars don’t take flight here. Or, did, before they made it one-way downhill…

Bison78
Bison78
1 year ago

I think your analysis of what would happen if the driver stamped on the accelerator to spin the wheels after taking off has a couple of flaws:
1. The car’s controls would not allow the wheels to spin like that.
2. This is a 4WD car: I think that the angular momentum input of each pair of wheels would be partially cancelled out by the other pair of wheels.
Related:
3. You have ignored the angular effects of the force applied by the rear wheels to the tarmac after the front wheels are in the air.

Stephen Granade
Stephen Granade
1 year ago
Reply to  Bison78

It’s definitely a rough-and-ready analysis. I didn’t get into what the car’s controls would allow at all.

To your second point, the back and front tires won’t cancel each other out unless the back tires spin in the opposite direction of the front ones. We represent angular momentum as a vector — an arrow with a given length and direction. To figure out the direction of the angular momentum vector, curl your right hand’s fingers in the direction the object is rotating and stick out your thumb. Your thumb represents the direction of the angular momentum vector. If both the front and back tires are spinning in the same direction, then their angular momentum vectors point in the same direction and add.

The rear wheels against the road won’t have an angular effect. The back wheels are constrained: the road’s normal force keeps the tires from sinking into the tarmac, but it can’t lift the tires off of the road. Because the tires are constrained, the car will rotate around their contact point. The force between the road and the back tires pass through that point. Their moment arm is zero and so can’t cause any rotation.

They could still rotate the car if the car’s accelerating, though! If the car’s accelerating, the tires apply a force to the rear axle. That can have a rotational effect, as I mentioned in my next-to-last paragraph. That’s why, once you’ve popped your motorcycle into a wheelie, you can gun the throttle and get the bike to fall back on you.

But, uh, don’t do that, please.

David Tracy
David Tracy
1 year ago

L-vectors destroyed me in college.

Andreas8088
Andreas8088
1 year ago

This is a great explanation! Thanks!

Fueledbymetal
Fueledbymetal
1 year ago

I will be sharing this with my 10th grade son as a real life example for his physics class. ????

John Beef
John Beef
1 year ago

I would love to have seen a calculation that would have given the exact speed for that Tesla to be airborne and stick the landing instead of flying so much further down the road, landing nose first.

Ranwhenparked
Ranwhenparked
1 year ago

So, magic, got it

Jeff Cronin
Jeff Cronin
1 year ago

As a physics undergrad I have to say that this is a great piece, just needs more calculus.

Thanks!

Red Devil GT 5.0
Red Devil GT 5.0
1 year ago

What I want to see is the poor Scoob that was senselessly destroyed

Sid Bridge
Sid Bridge
1 year ago

Fascinating! So if the car was going relatively slow and still jumped because of the physics at play surrounding the shape of this hill, what other slow vehicles could make a dramatic jump here? Asking for a friend. With an iron duke.

Icouldntfindaclevername
Icouldntfindaclevername
1 year ago

GREAT write up!!
Side note, please stop with the animated gifs on the main page!!

Jason Torchinsky
Jason Torchinsky
1 year ago

We actually went through some trouble to make sure those work! I thought for this story in particular, it made sense.

Drew
Drew
1 year ago

Doesn’t seem like you are excessively relying upon animation–I think animated gifs are great for stories like this one.

Evan Finn
Evan Finn
1 year ago

I like the animated gifs. they work fine for me

Dave Garland
Dave Garland
1 year ago

The animated gif works fine for me (running Pale Moon). Gratuitous autoplaying animations are obnoxious, but this one seems fine to me.

Scalewoodman
Scalewoodman
1 year ago

I LOVE this stuff! You guys are doing something really super special here and I am so glad to have a front row seat. Sure would enjoy some ‘after’ photos. I understand the idiot driver had a cat as a passenger (poor thing). Glad nobody was hurt or killed although there isn’t probably much left of the undercarriage of the Tesla. Maybe Rich Rebuilds will take it on as a project or somebody can find it at Copart?!

Charlie Burmood
Charlie Burmood
1 year ago

I appreciate this article and the physics you included. Reminds me of my Physics 101 and 102 courses. Well done.

37
0
Would love your thoughts, please comment.x
()
x