“Can an RC car travel 100,000 scale miles?” That was the question posed by YouTube creator Daniel Riley, and he took the challenge on for his channel, rctestflight. It’s an intriguing premise, but even more interesting than the answer to the question is exactly how Daniel managed to log so many miniature miles on his test vehicles.
Even with the conceit of “scale miles” (as in, one-tenth of a mile is a “scale mile” for a 1/10 scale car), we’re still talking major mileage here, with a total of 10,000 “full-size” miles as the goal. If we assume an average speed of 5 mph for the pair of all-terrain “crawler” style vehicles used in the test, and we set aside a full eight hours per day of driving, you’d need just under a year of 40-hour weeks to cover the distance. And that assumes both cars are driven at the same time.
Clearly, personally driving the cars day in and day out would not be a feasible testing methodology, and that’s what makes the 100,000-scale-mile challenge so much more interesting than merely answering “yes they can” or “no they can’t” – which is still pretty interesting.
Daniel’s solution to the problem – having the cars drive autonomously and even charge themselves – is incredibly ingenious, and the way the cars handle the endless driving and the toll it takes on the terrain is fascinating.
The Trucks
I’m slightly disappointed Daniel didn’t choose mainstream hobby brands such as Traxxas, Axial, Arrma, or others for his RC car selections and instead went with what could derisively be called “Amazon specials” (regardless of where they actually come from), but it doesn’t make the videos any less interesting or entertaining. And the vehicles he did choose represent two very different ways of building an off-road model, and it’s fun to see how they perform.
“Cheap car versus expensive car” is part of the angle for the videos, and the more expensive and technically intriguing model is the Yikong YK6101, which costs an outrageous $770. That’s $70 more than what the TRX-6 Mercedes-Benz G 63 from top brand Traxxas went for when it was still available, which is the model Yikong has taken its inspiration from.

Like the Traxxas truck it emulates, the YK6101 features six-wheel drive via three portal axles, locking differentials, and a two-speed transmission with the diffs and transmission, both remote-operable via the transmitter. For testing, the truck is run exclusively in low gear.

The second truck is the much less expensive, now-discontinued Exceed RC MadWatt 10. At $170, it’s a much cheaper model than the YK6101. The MadWatt throws scale realism out the window in the name of pure rock-climbing capability, with just enough chassis to hold the battery, electronics, and motor. Otherwise, this truck is all wheels and axles with a single-speed transmission geared for low speed and high torque, and locked “spools” in place of differentials for maximum rock-gripping traction. The MadWatt is built for running over dry rock beds and hangs its pinion and spur gears out in the breeze, which I mention here as foreshadowing. If you’re into the MadWatt 10 and want something similar, consider the Redcat Everest 10.
The Test Setup
Daniel’s previous attempt at the 100,000-mile scale challenge had cars tethered to run a circular course with a good head of steam. The speed and one-sided loading of the circle track proved too hard on the trucks chosen for that version of the experiment. For the do-over, the slower models above would run a winding course. Exactly how Daniel got the trucks to follow the path set out for them is ingenious, and cleverly uses off-the-shelf gear combined with smart engineering.

The heart of the setup is a perimeter wire and sensor kit “probably intended for DIY robotic lawn mowers.” After custom-programming an Arduino to operate a steering servo (as one does), Daniel constructed a quick and dirty foamcore model to test the wire-tracking system. Success!

After laying out the course in his yard and overcoming such obstacles as insufficient signal strength, animals chewing through the tracking wire, and optimizing the Arduino code to perfect the system for outdoor use, attention moved to automating vehicle charging and lap counting.
The charging solution is surprisingly simple. The battery’s positive and negative leads are attached to copper strips on a pole standing tall over the truck. As it passes through the charging station, spring-loaded pivoting wands connected to the charger – one positive, one negative – contact the charge pole with copper strips of their own, and the truck briefly stops to accept a charge. Since the truck is getting topped off on every lap, it doesn’t need to pause for long.

Lap counting was achieved simply by having the trucks roll over a spring-loaded board. A pair of contacts on the underside of the board were wired to an electronic lap counter, and when a truck rolled over the board, the circuit was completed to register a lap. Smart!

Finishing touches to the test setup included FPV (first-person view) cameras inside each truck for a driver’s POV that also allowed Daniel to remote-monitor the trucks and intervene in the event of a breakdown or course departure.
Here’s a link to the Part 1 video if you don’t see the embed below:
I don’t want to spoil the surprises of how it all turns out, but the cars prove impressively durable even as they sporadically fail, often with lessons for how full-size cars can fail, especially if not properly maintained.
Here’s Part 2:
Testing stretched on for months, with the trucks running rain or shine – and snow, too. And mud. So much mud. Watching how the trucks alter the terrain is just as entertaining as seeing how the terrain takes a toll on the trucks.



There’s nearly an hour and a half of content to enjoy, and I don’t think a second is wasted. It’s all fascinating stuff, especially for RC fans, but also for anyone who appreciates creativity, curiosity, and clever engineering.
Top graphic images: rctestflight/YouTube






Interesting.
But I’m not going to watch an hour of video on it.
I do wonder how it turned out, but I guess I’ll never know.
Now I need that YK 6×6 RC truck. Sadly it’s sold out because it would be a decent match for my 1975 Volvo C304, a 6×6 with solid portal axles and 37 inch tires.
Fortunately it’s sold out, because I need to put gas in said 6×6 with 37 inch tires…
I don’t need it, I can’t afford it, I don’t have the space. I don’t need it, I can’t afford it, I don’t have the space. I don’t need it, I can’t afford it, I don’t have the space. I don’t need it, I can’t afford it, I don’t have the space. I don’t need it, I can’t afford it, I don’t have the space.
I’ve been watching Daniel since Covid. He is an amazing engineer, and has been so fun to watch. He is always the first video I watch when I am on the tube.
RC stuff has come so far in durability and being repairable. The RC stuff I had as a kid was garbage. Nowadays even cheap hobby-ish RC stuff lasts and can be fixed. And the good stuff is a whole ‘nother league.
I have on and off watched his videos and they are very interesting. The ones on propeller design are fascinating. He constantly updates the testing when things go off plan.
Dang. If they had supercapacitor option for RC, this would be an ideal setup for it. I sure it would bring it’s own challenges.
Huh, I missed this one.
Daniel’s channel has been a pleasant diversion for a few years now; I especially enjoy a lot of his work with hydrofoils.
Marathon missions are nothing new for him either; he’s got lots of footage of RC cars literally wearing a groove into his backyard as they endlessly circle in an effort to determine the longevity of 3D printed gears, wheels and tracks, and fully automated solar-powered aircraft, exploring how far they can go over how long a mission (answer: damned far and all effing day).
Ahh yes, up next on “bored engineers without spouses and children”…
Sounds like projection.
A long, long time ago…
He did a very similar endurance test years ago. It was a tether test around a post, but same end goal. The tether supplied the power as well.
I liked the one where he tested whether he could have a laser automatically cut his grass. Answer: no, but it was fun to watch in a Bond Villain sort of way.