Good morning! We’re stepping away from the shitboxes today, because I found these two amazing old pickups that I just had to show you. Yes, they’re expensive, but if you look at what you’re really getting, compared to what’s available now, they might actually be worth it.
The results of yesterday’s poll confirm it: Ain’t nothin’ like the real thing. The classic VW Super Beetle beat the 2000s upstart by almost two to one. The New Beetle was the choice of those of you who were looking for a daily driver, but most of you preferred the old orange Bug as a toy.
I’m torn on this one. My brief tenure as steward for a Super Beetle feels a little like unfinished business, but I’m not sure I want to go down the air-cooled VW path again. I could make a case for the New Beetle as a rallycross car, and I’m sure it would make a great one, but honestly, I’d rather have a Golf. And I’d much rather have an old Scirocco than either of these. I’ll toss my vote to the Super Beetle, I guess, just for old times’s sake.

We hear it a lot around here: “We want cheap simple trucks!” The modern Default Truck is just too big, too complicated, too overloaded with crap. In some cases you can still get a “work truck” spec, with a single cab and nice sturdy vinyl seats, but they’re still ungodly expensive. We keep seeing a few glimmers of hope, both from established brands and hopeful newcomers, but those aren’t a sure thing yet. As it stands, if you want a nice, basic truck, you have to look to the past. And you have to be lucky enough to find one that isn’t already mostly used up. These two would fit the bill; they’re both from the time when trucks were mostly made of metal and had few creature comforts. But condition-wise, they’re practically time capsules, and that might make their steep prices worth it. Let’s check them out.
1979 Dodge D150 Custom Prospector – $9,950

Engine/drivetrain: 225 cubic inch OHV inline 6, three-speed manual, RWD
Location: Seattle, WA
Odometer reading: 58,000 miles
Operational status: Runs and drives well
When it comes to domestic trucks, you hear a lot about “Ford guys” and “Chevy guys.” But you don’t run across many “Dodge guys.” (These days I guess they’d be “RAM guys,” which just sounds bad.) But Dodge trucks have always been just as capable as the other two, and arguably cooler. This era of Dodge truck produced some genuine classics, like the Li’l Red Express, the Warlock, and the rest of the “Adult Toys” line (which kinda sounds bad too, come to think of it). But even the more ordinary Dodge trucks from the late ’70s went about their business with more panache than a typical Ford or Chevy.

This is a basic, bare-bones D150 Custom model, equipped with the lowest-tier drivetrain: a 225 cubic inch Slant Six and a three-speed manual transmission. Yes, it’s the fabled “three on the tree.” If you’ve never driven one, you should try it; it’s an experience every gearhead should have once. It starts, runs, and drives well, though the seller says the brakes pull slightly to the right. Might be a sticky caliper on the front, which should be easy enough to sort out.

Inside, it’s all classic truck greatest hits: a three-across bench seat with vinyl upholstery, rubber floors, and exposed steel on the inside of the doors. It’s in decent shape inside, though there are a couple cracks in the dash and the seller says the headliner is missing. But thinking about it, some old trucks didn’t even have a headliner. The radio doesn’t work, and neither does the passenger side windshield wiper. Hey, gotta have something to tinker with, right?

It has the “Prospector” package, which I believe is just some stripes and trim. It’s not perfect; there’s a dent in the tailgate and a wrinkle at the bottom corner of the driver’s door, but that just adds character. The bed is dented and scratched inside, as it should be. This truck has earned its keep over the years.
1983 Chevrolet C20 Scottsdale – $12,500

Engine/drivetrain: 350 cubic inch OHV V8, four-speed manual, RWD
Location: Van Nuys, CA
Odometer reading: 83,000 miles
Operational status: Runs and drives well
But if a half-ton shortbed Dodge isn’t quite enough truck for you, I have something here a little heavier-duty. This is a three-quarter-ton Chevy, from the classic “squarebody” era, which ironically was officially called the Rounded Line in Chevy’s advertising. The seller has it listed as a K20, but it’s definitely not four-wheel drive; therefore it is a C20. Neither is it a Silverado. It’s the Scottsdale trim level, which I believe was the base model in 1983. I can’t tell you how often I find vehicles incorrectly labeled.

Only one engine could possibly power a truck like this: the classic 350 small-block V8. It wasn’t exactly a powerhouse in the early ’80s; this one is rated at 160 horsepower and 260 pound-feet of torque. But this truck has a secret weapon to help make the most of that power: the Muncie SM465 four-speed manual transmission. First gear is a super-low 6.55:1 ratio, commonly known as a “granny gear,” good for climbing steep inclines or getting heavy loads moving, and not much else. In normal driving, you ignore first gear and treat it as a three-speed. It runs and drives “amazing,” according to the seller.

We don’t get a good look at the interior except for this photo of the dash, which looks fine. The seat isn’t visible in any photos at all, which worries me a little. The driver’s side door panel is shown, and it’s scuffed and battered, but not really damaged. The seller does say the air conditioning is “ice cold,” which is a nice bonus.

The outside looks good, but I have one concern: Some photos show the truck with the fender badges, and some without. So are they there, or not? As far as I know, those badges are riveted on, not glued, so if someone removed them, there should be holes. Did they Photoshop them out in some photos? The plastic bug deflector is there in all the photos. It’s so weird.
So how, you’re asking, can I claim that ten or twelve grand for these ancient beasts could actually be a good deal? Well, they’re half the price of a REO or a Slate, and neither one of those actually exists yet. They’re about a fifth the price of a brand-new truck. And you’ll never need a laptop to fix either one of them. Parts are cheap, and repairs are simple. Either one of them should last you indefinitely if you take care of it, especially if you’re not driving it daily and only using it when you need a truck. So which one would you take: the cool little six-cylinder Dodge, or the capable long-bed Chevy?






Of the 2, I would vote Chevy.
Only tangentially related – my father drove a 64 Ford F100 that he sold in early 2003 when he was diagnosed with terminal cancer (he passed later that year). I’ve wanted to try and track it down for a long time, and I recently found an old photo with the license plate. I’ve tried to use online services that provide owner details based on license plates, but have had no success. Does anyone know a service that might help with this?
I’ve heard some folks have had luck using local Facebook groups for that particular vehicle type to help track them down. Maybe try Facebook groups for the area he originally sold it in and go from there. I hope you can find it one day!
“But even the more ordinary Dodge trucks from the late ’70s went about their business with more panache than a typical Ford or Chevy.”
Let’s agree to disagree there. Chevy.
I have NEVER heard a Chevy truck described as having “panache”. Got any good examples for me?
Does grandpa’s GMC camper special count as panache? Besides his tractor that was the first vehicle I ever drove. Also first vehicle I crashed as I didn’t realize how easy the gas pedal would be to floor compared to the tractor (I was 14). Drove through the horse corral so I learned to drive and dig fence post holes on the same day. So for sentimental reasons, Chevy, but would happily own the Dodge.
Well the Silverado trim was pretty much the most luxurious pickup available for a number of years and pretty much was the root of the phrase “cowboy Cadillac”. Ford’s Ranger XLT trim was a close second and Dodge hadn’t had anything with anything resembling panache since the Don Knott’s endorsed “The Dude”.
Just got back from looking up the 80’s Silverado. Not bad. Definitely a better looking truck inside and out.
I would not use panache to describe a pickup at all. Dodges of this era sold because they were the cheaper option. They weren’t particularly desirable. Chevy and Ford were the Big Two in the pickup market for a reason.
Yeah, the lower-looking hood and the red paint with stripes qualifies as “panache” in my book. That dashboard also looks a step above the usual utilitarian fare of the era.
Panache? Dodge? Really?
I voted the Chevy Just a little newer and nicer I think and V8 power for a full size pick up. The Dodge looks cool but I’m not sure about the slant 6 in a full size truck. It does look nice in red though.
That is weird about the fender badges. I think those must be glued on and were added for the nighttime photos. I think if the seller really was a pro with Photoshop, he would have used that instead of his hand for the license plate blocking pic.
I’d be game for either, but in this vote I have to go with the SM465-equipped Chevy.
The Dodge is perfect for doing truck stuff without a fuss, I’m impressed by how good the body and interior look. Treat it well and it’s functionally going to live forever for you.
It’s not that I don’t like the C20 (I rebuilt a ’74 C10 and ran it for years my ownself) but if I’m going to do 3/4 ton towing or carrying stuff, I’ll do it with something more modern.
I could go either way, but I think the Chevy is going to be just slightly easier to source parts for. Unless you’re loading the crap out of that truck, the lazy V8 should get the job done without much trouble. Just make sure you keep up on the maintenance and check fluids regularly. These older 350s often need new head gaskets every 100k or less too.
I thought a Prospector was the Plymouth version of the RamCharger in the ’70s. I recall seeing one in our town growing up.
That was the Trailduster
Makes more sense… I was little and it’s been decades.
I voted for the Dodge, because three on the tree, but I’m not exactly sure what I would use one of these for. They’re just a little too pricey for me to feel comfortable putting one to work. For half the price of those, I got a ’97 F150. Not stylish, and cosmetically challenged, but it’s a perfect beater truck. It even has working four wheel drive, cruise control, and AC.
I seriously considered looking for an older truck like one of these though. I like simplicity. But I’ve got an air cooled Beetle, and don’t want to keep another ~50 year old car on the road. At least, not a work truck.
I prefer the slant 6 Dodge. It’s humble in a way that trucks just aren’t nowadays. There’s a beautiful simplicity to it. The squarebody, on the other hand, is a design that I’ve always found very dated and ugly. That concave line across the whole side of the truck just plops it right into the ’70s. I never thought them attractive, either. Maybe it’s decades of conditioning where they all rusted to pieces unless some guy lifted it, gave it open headers, and put it on 33s so he could behave like a modern diesel enthusiast without the smoke. But that’s probably just me.
The Chevy is the more modern design, with greater capability, and maybe even AC! Objectively the better choice. So of course…
I’ll take the Dodge. It looks good in red and is a lot more unusual than the bread-loaf-beige Chevy. That 225 “leaning tower of power” will keep running until the heat death of the universe, and three-on-the-tree is a bit of comfort for whoever rides the hump in the middle.
They’re both too clean and preserved to be work trucks at this point. Go find a beater version of the same truck for a third of the price if you want something to dirty up.
So true. A nice example of either truck can easily be found for half those prices or less.
Today is a neither day.
If I had any need of a truck, I would be all over that Chevy like white on rice. “Shut up and take my money”!
Basic hose it out spec with a manual, but it still has A/C! That’s a damned unicorn right there. I even like the bandaid beige on this thing.
In this duo gimme “The Leaning Tower of Power”.
Man, I have such fond memories of my dad’s ’77 and ’82 Dodges. They were absolute workhorses with the 318 despite being malaise era and we frequently loaded those things well beyond rated capacity. The ’77 was a three-on-the tree and I learned how to drive a manual transmission in that truck.
With that said, despite being a huge fan of the slant 6 that’s not enough motor – it needs the 318. Also, it needs an 8-foot bed to be a true work truck. Therefore, I must vote for the Chevy that has the proper 8-foot bed and the workhorse 350. But yikes, the pricing on both…
I voted Dodge, because like the Mighty Bagel said below, I have no use for a 3/4 ton pickup.
My old neighbor drove a 74 Dodge pickup, like the one here, except it was brown. Nothing much else to say about it, except for the guy kept it in immaculate shape.
I can still hear him giving it just a little gas as he let the clutch out when backing out of the driveway. That thing was so quiet and smooth.
60 votes in and it’s exactly 50% each. This one is going to be close.
That’s a pretty Chevy, would look good with a vintage Caveman or Six-Pac camper in the back.
Dodge Boys may have more fun, but pitting these two trucks against each other put me in the Chevrolet camp. It’s nearly twice the truck for not twice the price. More power, more gears, more storage, and A/C.
I had 2 3 on the tree vehicles. Give me the Chevy for better use as a weekend work truck that can be pressed into regular service as needed.
I came into this thinking it would be Chevy but after looking them over I’m going to say Dodge. I don’t need anything as heavy as a 3/4 ton and I like the less common looks of the old round headlight Dodge.
Though in all honesty, If I did pull the trigger on this, I would almost certainly end up swapping in a 360 with a 4 or 5 speed eventually. The 3 on the tree is novel but I think it’s charm would wear out eventually for me and I’d get the horsepower itch. .
For me it’s the old rounded off taillamps. Dodge got rid of them not long after and they never looked the same. Also, wasn’t Prospector a Plymouth trim?
I still somehow remember the “DODGE the father, RAM the daughter” stickers, but I ain’t seen one in forever thankfully. I like to think that making Ram separate from Dodge helped but I don’t trust the intelligence of kind of person who would put said sticker on their vehicle.
Anyways I still voted Dodge, mostly because I dig the fire truck red and column shifter. And it’s cheaper to boot. Both are solid choices though, I expect a close finish.
Either one is perfect…
I went into this convinced I was going Dodge. There are so many square body Chevrolets out there in decent shape and so few Dodges. However, when buying a simple truck to do truck stuff – that Chevy is hard to beat. If the Dodge was a 3/4 ton I’d probably go Dodge still.
Gotta go Chevy
V8 for the win