Home » Which Nearly-New Old Truck Would You Pick Up? 1979 Dodge D150 vs Chevy C20

Which Nearly-New Old Truck Would You Pick Up? 1979 Dodge D150 vs Chevy C20

Sbsd 11 18 2026

Good morning! We’re stepping away from the shitboxes today, because I found these two amazing old pickups that I just had to show you. Yes, they’re expensive, but if you look at what you’re really getting, compared to what’s available now, they might actually be worth it.

The results of yesterday’s poll confirm it: Ain’t nothin’ like the real thing. The classic VW Super Beetle beat the 2000s upstart by almost two to one. The New Beetle was the choice of those of you who were looking for a daily driver, but most of you preferred the old orange Bug as a toy.

Vidframe Min Top
Vidframe Min Bottom

I’m torn on this one. My brief tenure as steward for a Super Beetle feels a little like unfinished business, but I’m not sure I want to go down the air-cooled VW path again. I could make a case for the New Beetle as a rallycross car, and I’m sure it would make a great one, but honestly, I’d rather have a Golf. And I’d much rather have an old Scirocco than either of these. I’ll toss my vote to the Super Beetle, I guess, just for old times’s sake.

Screenshot From 2026 11 17 18 18 23

We hear it a lot around here: “We want cheap simple trucks!” The modern Default Truck is just too big, too complicated, too overloaded with crap. In some cases you can still get a “work truck” spec, with a single cab and nice sturdy vinyl seats, but they’re still ungodly expensive. We keep seeing a few glimmers of hope, both from established brands and hopeful newcomers, but those aren’t a sure thing yet. As it stands, if you want a nice, basic truck, you have to look to the past. And you have to be lucky enough to find one that isn’t already mostly used up. These two would fit the bill; they’re both from the time when trucks were mostly made of metal and had few creature comforts. But condition-wise, they’re practically time capsules, and that might make their steep prices worth it. Let’s check them out.

1979 Dodge D150 Custom Prospector – $9,950

885547367 1742552686812127 2109192144466711870 N
Image: Facebook Marketplace seller

Engine/drivetrain: 225 cubic inch OHV inline 6, three-speed manual, RWD

Location: Seattle, WA

Odometer reading: 58,000 miles

Operational status: Runs and drives well

When it comes to domestic trucks, you hear a lot about “Ford guys” and “Chevy guys.” But you don’t run across many “Dodge guys.” (These days I guess they’d be “RAM guys,” which just sounds bad.) But Dodge trucks have always been just as capable as the other two, and arguably cooler. This era of Dodge truck produced some genuine classics, like the Li’l Red Express, the Warlock, and the rest of the “Adult Toys” line (which kinda sounds bad too, come to think of it). But even the more ordinary Dodge trucks from the late ’70s went about their business with more panache than a typical Ford or Chevy.

883722229 1151591277206092 492597340566339940 N
Image: Facebook Marketplace seller

This is a basic, bare-bones D150 Custom model, equipped with the lowest-tier drivetrain: a 225 cubic inch Slant Six and a three-speed manual transmission. Yes, it’s the fabled “three on the tree.” If you’ve never driven one, you should try it; it’s an experience every gearhead should have once. It starts, runs, and drives well, though the seller says the brakes pull slightly to the right. Might be a sticky caliper on the front, which should be easy enough to sort out.

878223772 1781662076470209 4204920206965205726 N
Image: Facebook Marketplace seller

Inside, it’s all classic truck greatest hits: a three-across bench seat with vinyl upholstery, rubber floors, and exposed steel on the inside of the doors. It’s in decent shape inside, though there are a couple cracks in the dash and the seller says the headliner is missing. But thinking about it, some old trucks didn’t even have a headliner. The radio doesn’t work, and neither does the passenger side windshield wiper. Hey, gotta have something to tinker with, right?

876208896 1460968039314178 7707489677770635037 N
Image: Facebook Marketplace seller

It has the “Prospector” package, which I believe is just some stripes and trim. It’s not perfect; there’s a dent in the tailgate and a wrinkle at the bottom corner of the driver’s door, but that just adds character. The bed is dented and scratched inside, as it should be. This truck has earned its keep over the years.

1983 Chevrolet C20 Scottsdale – $12,500

00707 39j1ccfvfjy 0nm0hw 1200x900
Image: Craigslist seller

Engine/drivetrain: 350 cubic inch OHV V8, four-speed manual, RWD

Location: Van Nuys, CA

Odometer reading: 83,000 miles

Operational status: Runs and drives well

But if a half-ton shortbed Dodge isn’t quite enough truck for you, I have something here a little heavier-duty. This is a three-quarter-ton Chevy, from the classic “squarebody” era, which ironically was officially called the Rounded Line in Chevy’s advertising. The seller has it listed as a K20, but it’s definitely not four-wheel drive; therefore it is a C20. Neither is it a Silverado. It’s the Scottsdale trim level, which I believe was the base model in 1983. I can’t tell you how often I find vehicles incorrectly labeled.

00x0x 88kkjl4epaq 0ci0t2 1200x900
Image: Craigslist seller

Only one engine could possibly power a truck like this: the classic 350 small-block V8. It wasn’t exactly a powerhouse in the early ’80s; this one is rated at 160 horsepower and 260 pound-feet of torque. But this truck has a secret weapon to help make the most of that power: the Muncie SM465 four-speed manual transmission. First gear is a super-low 6.55:1 ratio, commonly known as a “granny gear,” good for climbing steep inclines or getting heavy loads moving, and not much else. In normal driving, you ignore first gear and treat it as a three-speed. It runs and drives “amazing,” according to the seller.

00c0c Ep0hd48whs5 0ci0t2 1200x900
Image: Craigslist seller

We don’t get a good look at the interior except for this photo of the dash, which looks fine. The seat isn’t visible in any photos at all, which worries me a little. The driver’s side door panel is shown, and it’s scuffed and battered, but not really damaged. The seller does say the air conditioning is “ice cold,” which is a nice bonus.

00k0k Lscba3p7un9 0ci0t2 1200x900
Image: Craigslist seller

The outside looks good, but I have one concern: Some photos show the truck with the fender badges, and some without. So are they there, or not? As far as I know, those badges are riveted on, not glued, so if someone removed them, there should be holes. Did they Photoshop them out in some photos? The plastic bug deflector is there in all the photos. It’s so weird.

So how, you’re asking, can I claim that ten or twelve grand for these ancient beasts could actually be a good deal? Well, they’re half the price of a REO or a Slate, and neither one of those actually exists yet. They’re about a fifth the price of a brand-new truck. And you’ll never need a laptop to fix either one of them. Parts are cheap, and repairs are simple. Either one of them should last you indefinitely if you take care of it, especially if you’re not driving it daily and only using it when you need a truck. So which one would you take: the cool little six-cylinder Dodge, or the capable long-bed Chevy?

 

Follow us on:

Facebook
WhatsApp
Twitter
LinkedIn
Reddit
Subscribe
Notify of
97 Comments
Inline Feedbacks
View all comments
Matty
Member
Matty
2 days ago

Slap some Forest Service-esque decals to that Chevy and rock on.

1978fiatspyderfan
1978fiatspyderfan
2 days ago

I was split on this but the extra $2250 for the truck from a buyer who doesn’t know what he’s got makes me Dodge the Chevy.

Butterfingerz
Butterfingerz
2 days ago

I just love the sound of those old Dodge starters.

Griznant
Member
Griznant
2 days ago

I’m a Dodge guy, and have an ’82 Ram with a built slant (180hp) and a 727. It is decently strong, but not fast which is why a 440 is going in.

Having said that, you can’t really argue with a tree-fiddy and a 4-speed. Chevy for me today.

Pneumatic Tool
Pneumatic Tool
2 days ago

The Dodge is a charmer, but I can’t imagine that the pull from the slant-6 would amount to much. Yes, I’d plan on doing stuff with these trucks – not beating them up or anything, just using them as God intended, so torque will be a factor. For that, the Chevy is just about perfect.

On the pricing part – I don’t view either of these as being overpriced. Based on the presentation, they’re both original and very well maintained. You could rightfully exhibit either one in a car show right now, but that’s not entirely proper…they want to work for a living.

Studmuffin
Member
Studmuffin
2 days ago

GM truck. I really dislike the look of full-size short-bed trucks; they look almost as wide as they are long. 3/4 ton also makes it useful as a truck rather than just mulch. That slant six made 110hp back in the day.

1978fiatspyderfan
1978fiatspyderfan
2 days ago
Reply to  Studmuffin

Sorry Slant 6 manual transmission is cockroach reliability.

UnseenCat
UnseenCat
2 days ago

It’s close, and despite the pricing I have a strong “Why not both?” urge.

I suppose since I’ve already owned a Squarebody and haven’t owned a Dodge from this generation, then I’ll have to sample the whole smorgasbord of good old trucks and take the Dodge.

Really, it’s win-win either way. These are great vehicles. Simple, durable, easy to fix and keep running.

GirchyGirchy
Member
GirchyGirchy
2 days ago

Having already owned a FCT (Flesh-Colored Truck) – which was also a Chevy – this one was a no-brainer.

Sid Bridge
Sid Bridge
2 days ago

Not a moment of hesitation here. IMO the tin grill is one of the coolest looking trucks ever made. I’d rock a 6-cyl 3-on-the-tree version, too. Maybe I watch too much Dead Dodge Garage (thanks to this site), but I love these trucks. Plus they aren’t a common sight anymore. How long is the drive to Seattle?

Dogisbadob
Dogisbadob
2 days ago

Too bad that Dodge truck doesn’t have the hood ornament. Some time in the 80s, they pout a really cool ram hood ornament on the hood.

I still voted for the red truck

Whelmed but not Overly
Whelmed but not Overly
2 days ago

Both seem overprices; Chevy is a better value

1978fiatspyderfan
1978fiatspyderfan
2 days ago

From a guy who does not know trucks. I sense a man bun here. Jk

Angel "the Cobra" Martin
Member
Angel "the Cobra" Martin
2 days ago

Am I missing an embedded link to the vehicles? BTW, the V8 all day.

Anonymous Person
Anonymous Person
2 days ago

They hid the links in the vehicle description titles above the photos.

Surprised me, too.

Last edited 2 days ago by Anonymous Person
MaximillianMeen
Member
MaximillianMeen
2 days ago

Dodge for me. I’ve always liked the proportions of a short bed regular cab over the long bed. Plus the red with sunset stripes is a wonderfully 70s look. Would be even better with a step-side bed, but I guess you can’t get everything.

Mike F.
Member
Mike F.
2 days ago

I don’t want or need a truck, but if I have to have one, then it’s the one with the 4-speed and the A/C that works. Chevy it is.

DONALD FOLEY
Member
DONALD FOLEY
2 days ago
Reply to  Mike F.

I don’t want or need a truck either, so the Dodge is plenty (more than enough) for me.

IRegretNothing, Esq, DVM, BBQ
Member
IRegretNothing, Esq, DVM, BBQ
2 days ago

Both of them tick the boxes for saying you have a “real truck”, all steel and nothing that you don’t need. I think most people would quickly realize though that they liked the idea of owning a simple old truck more than actually owning one. Modern trucks have a whole lot of features that you may not realize you miss until you hop into something that has no features.

I think the C20 is the better purchase today. It may even appreciate if you keep it this clean while comparable square bodies slowly return to the earth. But then, doesn’t that completely defeat the purpose of buying a simple old truck for doing truck stuff? A lot of the truck cred goes away if you turn your basic fleet spec truck into a garage queen. In my neck of the woods you can’t even drive it in the winter unless you want to watch your cheap but now expensive truck crumble away like that dumbass who drank from the wrong chalice in The Last Crusade.

GirchyGirchy
Member
GirchyGirchy
2 days ago

Shortly after buying my ’98 Chevy C1500 back in 2011, my wife mentioned she wished I’d found one that was even older.

Now that truck’s moved on and we have a ’95 Ford F150, which she finds less comfortable and stinkier. No telling what she’d have thought about something pre-emissions. Man, they absolutely reek, and most ride like complete shit.

Last edited 2 days ago by GirchyGirchy
Clark B
Member
Clark B
2 days ago
Reply to  GirchyGirchy

We needed a basic work truck and I had similar thoughts. Get something older, an OBS F150, something like that. Ended up with a ’97, because the OBS Fords were getting pricy, especially if they were 4×4 which we needed. The ones in our price range were beat to shit. So far, I’ve been very happy with it and it’s been worth every penny I spent on it. Especially because it has working AC, basically a requirement here.

GirchyGirchy
Member
GirchyGirchy
2 days ago
Reply to  Clark B

When I got my Chevy, I was primarily wanting a RCLB OBS Ford, 2WD with the I6 and a manual. But I wasn’t super picky and found the Chevy at a local lot at a great price. It was a RCSB, with the 305 and auto (already rebuilt!) and 2WD. Even back then most were rough as hell and it was rust free, other than a spot in the floor/inner rocker a buddy fixed for me. It required the usual fixes over the years but was a nice, comfortable truck that served us well.

The Ford was special ordered by my dad, so I got it for free. It’s a 4×4 ECLB with the 351 and auto trans, big stupid thing with a nicer interior than the Chevy but doesn’t ride as well. Having the lockable interior storage and long bed have been very handy, though.

4jim
4jim
2 days ago

I would miss headrests in an old truck. I just cannot wrap my head around how long trucks went without headrests. But one could put the back of one’s head through the window glass in an accident.

GirchyGirchy
Member
GirchyGirchy
2 days ago
Reply to  4jim

My Chevy did have taller ones, but my Ford’s only go up to the base of my skull. It’s an ext cab, so I’ll simply get whiplash instead of cracking my skull open.

It’s another reason why I only drive it when necessary.

4jim
4jim
2 days ago

I have driven three on the tree and four on the tree.
I would pick the Chevy for parts ubiquity, and an 8 foot box.

TK-421
TK-421
2 days ago

I abstain from voting like a Democrat today.

My grandpa had an old Ford truck (guessing late 60s/early 70s) with the column 3 speed. Didn’t think anything about it until I became a driver myself.

Also, 1st job out of the Navy at a car dealership in 91. Someone drove an old work van into the place, the poor young guy that moves them to the waiting area got in, got back out, and was accompanied by a service manager. It had the 3sp and he had no idea how to drive it.

John Beef
Member
John Beef
2 days ago

If you’ve never driven one, you should try it; it’s an experience every gearhead should have once.

I voted Dodge in spite of the 3 on the tree. In the 90s my roommate had a C10 with a column shift for one winter (swapped his Pulsar NX with his dad who lived on the coast) and driving it was not an easy task. However, I like single cab short beds better than long beds, and would never need a V8.

Cloud Shouter
Cloud Shouter
2 days ago

Mopar or no car!

Whelmed but not Overly
Whelmed but not Overly
2 days ago
Reply to  Cloud Shouter

Feel bad for you; username checks out

Cloud Shouter
Cloud Shouter
2 days ago

Likewise.

SlowCarFast
Member
SlowCarFast
2 days ago

Not a truck enthusiast or truck user, but I love the look of the Dodge. That color and striping helps, but the grill and headlight combo also works for me.
if I was a farmer, then maybe I’d go with the beige Chevy.

RustyJunkyardClassicFanatic
Member
RustyJunkyardClassicFanatic
2 days ago

C20! I love the Squarebodies…no matter what gen. I love both of these, but this was pretty easy since I think all classic Chevy trucks in general are such a great design, & I especially love the entire C/K series body styles like this one, & even further the beautiful dashboard especially the whole gauges area. I think my favorite grilles are more of the 70’s style, but still like the 80’s like this one. These are my favorite Chevy trucks ever; I really want to eventually get one and fix it up…it would be so awesome to finally own one! The Dodge is great, but w/ some of the little things wrong added up, it’s not quite worth the $.

“could actually be a good deal?”

Definitely, with how crazy Squarebody prices have gotten…especially w/ the A/C being ice cold since if it wasn’t, that would be big $ to fix…but to me, it would be less about “values”, & more about the ownership experience of having an awesome C20! (or C10 is all I’d want, at least to begin with)

Froomg
Member
Froomg
2 days ago

The three-on-the-tree significantly enhances peace of mind for any gentleman seated in the middle of the bench.

GENERIC_NAME
GENERIC_NAME
2 days ago

I’ll take the Chevy – I want the option to load up with drywall even if I never will.

SlowCarFast
Member
SlowCarFast
2 days ago
Reply to  GENERIC_NAME

You get points for honesty.

SimpleFix
Member
SimpleFix
2 days ago
Reply to  GENERIC_NAME

COTD
How many people have bought a full size and never put a 4×8 in it. At least I’ve put 12 4x8s of 3/4″ plywood in our Pacifica.

Last edited 2 days ago by SimpleFix
4jim
4jim
2 days ago
Reply to  SimpleFix

For me it is sleeping in the bed under a cap/topper it is so much easier in an 8ft box than new 4ft-ish truck boxes.

The Stig's Misanthropic Cousin
Member
The Stig's Misanthropic Cousin
2 days ago

I voted for the Chevy. I have always wanted a squarebody Chevrolet, although I have never gotten around to buying one. I also like the Dodge, though.

I would like buy both just to make sure they are preserved. It is great to use interesting classic trucks for lighter truck stuff, but trucks like these shouldn’t be used for heavy work. If you want an expendable work truck to destroy, there are plenty of less interesting/historically significant options to choose from in this price range. Let these trucks have a dignified retirement.

Frank Wrench
Frank Wrench
2 days ago

Wow it’s a perfect tie right now!

My 92 F250 is pretty much the Ford version of that Chevy except it has the 300-6 and NP235, so I’m going Dodge. I used to have an 87 D200 with a 318 and Torqueflite 727, a very solid combo. This Dodge will check off 2 boxes for me: Slant 6 and 3 on the tree. When I was a kid I thought 3 on the tree meant a column shift 3 speed auto and didn’t understand what the big deal was….

97
0
Would love your thoughts, please comment.x
()
x